http://www.can-amforum.com/forums/ Can-AmForum.com is the #1 Can-Am/BRP Headquarters featuring the most comprehensive collection of Can-Am ATV information in the world! Checkout the dedicated Can-Am Quad Forums for the Renegade, Outlander, Outlander MX, DS450 and more! en Fri, 18 May 2012 06:29:29 GMT vBulletin 60 http://www.can-amforum.com/forums/images/misc/rss.jpg http://www.can-amforum.com/forums/ http://www.can-amforum.com/forums/can-am-renegade/35717-my-small-project.html Fri, 18 May 2012 05:55:19 GMT Ok so im changing things up a bit with my renegade. I sold my lift, putting a little of that money toward payoff. At the moment the only mods are... Ok so im changing things up a bit with my renegade. I sold my lift, putting a little of that money toward payoff. At the moment the only mods are pcv, snorkles, and cvtech. I bought a Full Muzzy, Tune Monster, 3gx belt (stock one is shot), Highlifter bracket lift, so far. I still have a little money left i can spend on it and im really wanting to get the RWHP numbers up around 65-70. I know i will need a custom tune on the dyno and most likely cams to get there. I also would like to get a STM secondary to help put the power to the wheels. I dont think i will have the money to finish all of that real quick but its going to happen.

I am also powder coating the front bumper, rear grab bar, handlebars, and maybe the brake levers, all chrome. Going to powdercoat the lift componets also. I have a friend that does powdercoating and i already have alot of colors of my own.

Please give me input on what or what not to do. If im missing something or need to do something other than i listed your input will be appreciated! ]]> Can-Am Renegade Regency http://www.can-amforum.com/forums/can-am-renegade/35717-my-small-project.html http://www.can-amforum.com/forums/can-am-outlander/35716-post-pics-28-s-stock-rims.html Fri, 18 May 2012 04:56:13 GMT Looking for pics of gen 2's with 28"'s on the stock rims. Ya got any? ]]> Can-Am Outlander SWAINER http://www.can-amforum.com/forums/can-am-outlander/35716-post-pics-28-s-stock-rims.html http://www.can-amforum.com/forums/can-am-outlander/35715-good-quality-wheel-spacers.html Fri, 18 May 2012 04:55:47 GMT I am looking for good quality wheel spacers. I just bought a se tfrom Royal Distributing in Ontario and they were BAD. the studs were visibly... I am looking for good quality wheel spacers. I just bought a se tfrom Royal Distributing in Ontario and they were BAD. the studs were visibly leaning to one side and I couldn't get them to go on my rims even sitting on the on the floor and lining them up the studs were so off. I returned them bu now I don't know where to buy a good set and what brand I should look for.

Has anyone bought a good set that accepts the rims without a lot of work getting them to go on. If so can you tell me what brand you bought and where you bought them please. ]]> Can-Am Outlander nonothing http://www.can-amforum.com/forums/can-am-outlander/35715-good-quality-wheel-spacers.html http://www.can-amforum.com/forums/can-am-renegade/35714-doin-deal-tomorrow.html Fri, 18 May 2012 03:08:22 GMT ok guys, worked out a deal with a guy, for a 2011 renegade xxc with hmf pipe, itp mudlites, hmf programmer, k&n filter, loading ramps, set of brand new itp holeshot tires (stock),riding pants,jersey,helmet,boots,gloves,goggles and a stihl chainsaw for $8900 haha what do ya think? might go get it tomorrow am before work. 2hr drive from my house. ]]> Can-Am Renegade 09RenegadeX http://www.can-amforum.com/forums/can-am-renegade/35714-doin-deal-tomorrow.html http://www.can-amforum.com/forums/dyno-reports-tuning-center/35713-pcv-tuning.html Fri, 18 May 2012 02:17:14 GMT Hey hey new here. Have a 2011 outty 800 hmf slip on and PCv xmr snorkel soon. I don't have the auto tune and don't really want to get one but was wondering if anybody could send some numbers my way to start me off tuning this bad boy. Any help would be awesome

Thanx ]]> Dyno Reports | Tuning Center HiddenOutty11 http://www.can-amforum.com/forums/dyno-reports-tuning-center/35713-pcv-tuning.html http://www.can-amforum.com/forums/please-introduce-yourself/35712-hey-memphis.html Fri, 18 May 2012 00:39:21 GMT just picked up a new commander xt last week. i've been reading a lot on this forum educating myself on this new machine, figured i need to join. ]]> Please Introduce Yourself 1badcommander1000 http://www.can-amforum.com/forums/please-introduce-yourself/35712-hey-memphis.html http://www.can-amforum.com/forums/can-am-outlander/35711-rear-pegs.html Fri, 18 May 2012 00:33:49 GMT I Bought my quad couple weeks ago and i have the rear seat for the wife when we ride together. I'm wondering if anyone sells rear pegs for the 2012 Outlander 800r xt??? Me and the wife go away in a couple weeks riding and without rear pegs its a major pain!! ]]> Can-Am Outlander outlanderman23 http://www.can-amforum.com/forums/can-am-outlander/35711-rear-pegs.html http://www.can-amforum.com/forums/please-introduce-yourself/35710-me-se-texas.html Fri, 18 May 2012 00:03:58 GMT New to forum and Can-Am. Just bought a Renegade 1000 but won't get to ride it til Memorial Day Weekend. I have only ridden/owned mid singles so I may be asking alot of questions. ]]> Please Introduce Yourself EVIL1000 http://www.can-amforum.com/forums/please-introduce-yourself/35710-me-se-texas.html http://www.can-amforum.com/forums/please-introduce-yourself/35709-im-back.html Fri, 18 May 2012 00:02:18 GMT 3 years ago i was forced to sell my beautiful 08 renegade 800x because of a divorce..im now back on my feet and just purchased a 2011 outlander xxc... 3 years ago i was forced to sell my beautiful 08 renegade 800x because of a divorce..im now back on my feet and just purchased a 2011 outlander xxc as a new holdover...glad to be back from central MN. ]]> Please Introduce Yourself Motorbreath http://www.can-amforum.com/forums/please-introduce-yourself/35709-im-back.html http://www.can-amforum.com/forums/can-am-xmr/35708-rubberdown-customs-xmr-spacers-installed.html Thu, 17 May 2012 23:18:51 GMT Not the standard yellow springs in these pics, and I cant show you the rest of the machine as its not my machine and is ALMOST finished with its... Not the standard yellow springs in these pics, and I cant show you the rest of the machine as its not my machine and is ALMOST finished with its awesome looking build, but here are the shocks with the spacers being installed.....







]]> Can-Am XMR Rubberdown http://www.can-amforum.com/forums/can-am-xmr/35708-rubberdown-customs-xmr-spacers-installed.html http://www.can-amforum.com/forums/can-am-renegade/35707-need-help-gearbox-sensors.html Thu, 17 May 2012 21:56:30 GMT Short Story...picked up a basket case 2007 renny with no trans. I got my hands on a 2011 trans and put it in.... Now obviously the connectors are... Short Story...picked up a basket case 2007 renny with no trans. I got my hands on a 2011 trans and put it in.... Now obviously the connectors are different, but how do I figure out which wire goes where??

Thanks for the help. ]]> Can-Am Renegade Campos http://www.can-amforum.com/forums/can-am-renegade/35707-need-help-gearbox-sensors.html http://www.can-amforum.com/forums/can-am-outlander/35706-need-rubber-boot.html Thu, 17 May 2012 20:20:18 GMT Anyone know if there is a part number for the rubber boot that protects the 2/4 wheel drive selector switch on the handlebar? Anyone know if there is a part number for the rubber boot that protects the 2/4 wheel drive selector switch on the handlebar? ]]> Can-Am Outlander bluefin1983 http://www.can-amforum.com/forums/can-am-outlander/35706-need-rubber-boot.html http://www.can-amforum.com/forums/please-introduce-yourself/35705-new-ntx.html Thu, 17 May 2012 20:07:01 GMT just joined on and bought a 2011 renegade white 800 just joined on and bought a 2011 renegade white 800 ]]> Please Introduce Yourself whiterenegade http://www.can-amforum.com/forums/please-introduce-yourself/35705-new-ntx.html http://www.can-amforum.com/forums/can-am-renegade/35704-gearbox-oil-cvt-cover.html Thu, 17 May 2012 19:56:34 GMT Hi, within the last days I lost more and more top speed. So I opened the cvt cover and found oil everywhere. After I disassambled the primary and... Hi,

within the last days I lost more and more top speed. So I opened the cvt cover and found oil everywhere. After I disassambled the primary and secondary, I saw the issue. The oil seal of the gearbox input shaft was damaged. So I replaced the oil seal and o-ring and cleaned everything with brake cleaner.

But there is still an issue. I think there is still oil in/on belt and slips more than normal. How to clean it? Or is exchange the only way to solve the problem? ]]> Can-Am Renegade Knautsch http://www.can-amforum.com/forums/can-am-renegade/35704-gearbox-oil-cvt-cover.html http://www.can-amforum.com/forums/please-introduce-yourself/35703-howdy-central-bc-ehhhh.html Thu, 17 May 2012 17:55:25 GMT Hello everyone, I'm a tree butcher just west of prince george, married with 7&9 year old girls. Been many years since I've had a bomb, not really brand loyal but I always feel like I'm home with bombardier in the garage. Went 11 years without any sleds, found a nice '07 tundra for the kids to learn on, grabbed a 600 ace expedition for myself and the wife, putting around with the kids and running trails is what we do in the winter.

With atv's, we picked up 2-3 years ago some Chinese slave labor pot metal machines for a grand just to see how they like it, my girls loved it :thumbsmilie:

Stepped up a few sp90's for them, great little machines, had an 850xp for myself and a sp500 for the wife, had a chance to upgrade hers to the 1000xt with power steering, so yes my wife has the faster machine lol.

I love riding both, I find the xp is smoother riding, less vibes, better fender coverage, slightly better clearance. The 1000xt, well it's been years since I rode a machine you can steer with just a bit of body motion and throttle, awesome, just awesome. :yahoo:

That and the power steering, if the machine was available without it I would of gone without it since I've never ridden a machine with power steering, but man this is the first time in years I've done a full days ride without my wrecked shoulders feeling the pain for days after.



Over the next few years, the xp will either be replaced or made into strictly a huge mud machine, maybe I'll just keep it for a spare group ride. I see a max xt coming next season maybe, I like the bomb!

Game on!!:thumbsmilie: ]]> Please Introduce Yourself Hoseclamp http://www.can-amforum.com/forums/please-introduce-yourself/35703-howdy-central-bc-ehhhh.html