2011 outty xxc with Brp winch kit

tach · #1 05-24-2011, 04:51 PM

Hello, I asked this question in outlander section but wanted to see if you knew the answer. I have a 2011 outlander xxc and plan on getting the Brp winch kit because of the xxc front bumper. Will your winch fit the Brp kit?

Huck BB62 · #2 05-24-2011, 07:37 PM

My buddy just bought a Warn kit and had a Viper solid fairlead cut and welded to match the angle of the front skid. Slick install.

gibben · #3 05-24-2011, 08:06 PM

I am using the BRP winch mount bracket and BRP Outlander XXC fairlead bracket with my Warn 3000 XT winch. I used a long sawzall blade to cut the front bumper for the fairlead mounting plate. I have pics of the install here: xxc bmper n winch mount - can-am ATV Forums - can-amtalk.com

-Rob

tach · #4 05-24-2011, 09:16 PM

Thanks Gibben!! I'm assuming then that I could get the viper with their mounting kit and get the brp winch mounting kit (703500547) and rolled fairlead (715000011) and the Winch mounting kit (715001121) and be good to go???? I can see where the 1121 and the 0011 mounting kits go. But I don't see where the second 0547 mounting kit goes..

gibben · #5 05-25-2011, 06:03 PM

tach,

Part # 703500547 is the bracket the winch bolts down to. If I recall MotoAlliance has their own mount bracket you can purchase that provides this function. You can see this mount in my 2nd and 3rd pictures it is just a little hard to recognize. Most winch kits come with a fair lead so really the only part you probably need is part # 715001121 to mount the fair lead on the bumper. That is unless you want to modify an aluminum hawse fair lead like others on the forum have.

-Rob