Can-Am ATV Forum banner

Search results

1-20 of 493 Results
Advanced Search
  1. 28” zillas on stock 14” rims any issues

    ATV Tires and Wheels
    I only have 2” spacers on the springs. The wheels are itp with a 4+2 offset. I had previously trimmed my floor boards so that helps
  2. 28” zillas on stock 14” rims any issues

    ATV Tires and Wheels
    You’ll be fine with 28s I run 30s on my 570 with no issues
  3. 570 outlander xmr

    Can-Am XMR
    G2 is the 650-1000 machines and the the G2L is the 450-570. You have the G2l. That exhaust should fit fine, no real changes between 18 and 19. Expect to add a fuel tuner with the new exhaust
  4. 27x9x14 and 11x14 tires will they fit

    ATV Tires and Wheels
    They will clear
  5. Thumb throttle. WHY?

    Can-Am / BRP
    I prefer twist too. Always put one on my sport quads. Like mentioned above, you get more familiar with using the thumb throttle
  6. Can Am safe lubricants

    ATV Tech Tips
    There are no wet clutches on a can an
  7. Winch Issue

    Can-Am Outlander
    Sounds like a bad solenoid
  8. Im steven, im new to this fourm

    Please Introduce Yourself
    7/8 is stock
  9. Hello from New York!

    Please Introduce Yourself
    Welcome, congrats and also in New York 👍🏼 A ripped boot does not always mean new axle. If it still has grease inside, should still be good. You can replace just the boot. Actually put a new one on today
  10. Ecm reflash from wholesaleatv

    Can-Am Outlander
    I still need to send mine out
  11. Tires and rim upgrade

    Can-Am / BRP
    You’ll have plenty of room
  12. Diff fluid change

    Can-Am Outlander
    Why not just check it for piece of mind?
  13. 400 vs 450 outlander

    Can-Am Outlander
    When I was shopping there were two machines I was gonna choose from. One the 450 and the other a 570. I went with the 570, the extra power for a little more money was a no brainer
  14. Need some help deciding

    Can-Am Outlander
    All the can am g2s use the same frame
  15. Can am renegade steering issues

    Can-Am Renegade
    There are no grease fittings there. You have to actually remove the bushings to get any real grease in there
  16. Need some help deciding

    Can-Am Outlander
    I went with a 570 dps. Who doesn’t want a v twin?
  17. WTB: Canam Commander Stock Shocks

    Want To Buy
    Have you checked eBay?
  18. Can am renegade steering issues

    Can-Am Renegade
    Probably need to grease the steering stem bushings. The one in front of the air box is fun to get to. the bottom is easier to get to. It’s just under the dps unit.
  19. New year, new shoes for the outty

    Can-Am Outlander
    Haven’t tried them yet lol
  20. New year, new shoes for the outty

    Can-Am Outlander
    Classic for sure. They came stock on the outty xmrs a few back if I remember correctly. They are on sale for something like $46 each and free shipping. Couldn’t pass that up. As for the tires, the lugs are huge! 1.75” in the middle and 2” on the sides. These tires are plenty wide front and...
1-20 of 493 Results
Top