Can-Am ATV Forum banner
2008 can-am outlander

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 8 Results
  1. Can-Am / BRP
    2008 Outlander 500 Max XT Just got it back from the place I bought it today and rolled it on its side this evening misjudging a turn going uphill . It only ran for 10 seconds or so but it was on its side for 3 minutes until I could get the winch cable out to the closest tree. Winched it over...
  2. ATV Tires and Wheels
    Hey everyone, I have learned a lot from reading similar posts on this forum about wheels and tires, but I still have not been able to come to a final decision. I could use some advice on what to do next. I also am not sure what information is correct as I have read a lot of different data...
  3. Suspension
    I purchased a used 2008 Outlander 400 for my wife last year. I noticed the suspension was pretty soft and sags significantly in the rear. I tried to adjust the rear shocks and couldn't get it to budge, even with the rear jacked off the ground. I wanted to upgrade the shocks on my 2007...
  4. Can-Am Outlander
    My wife's 2008 Outlander 400 desperately needs some low end to mid range torque. It is stock other than new Kenda 8 ply Bearclaws. I assume a clutch kit may be one way to go. Any suggestions for a clutch kit or any other suggestions. We do mostly trail riding in the Northeast. Not a ton of...
  5. Can-Am Outlander
    Got an 2008 Outlander but the stock pipe is spring mount but ended up getting a clamp mount aftermarket pipe... anyway of rigging it up to make it work?
  6. Can-Am Outlander
    I know there are a ton of threads on snorkel kits on this forum, but I have some questions I hope someone can help me with. I would like a quality snorkel kit that will work for my outtie 650. Also, part of my confusion is i Have 08 and there are limited options on just about everything for...
  7. Please Introduce Yourself
    Hi, I have an 2008 outlander 800, I have an hmf pipe on it but, I am trying to figure out an way to make it go faster??? if you have any ideals or suggestions on how i can get this done please share......
1-7 of 8 Results