Can-Am ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 26 Results
  1. Can-Am Outlander
    I have a 21' Outlander 850 XT with 500 miles on it. I am wondering what signs I should look for with belt wear. I know several signs of a worn drive belt such as choppy & higher engagement & the belt slipping. That being said, I do have a slightly higher engagement than it used to be. I also...
  2. Can-Am Outlander
    Just bought a used 20 XMR 570. Only 336kms and the previous owner took very good care of it. Took it for its first little ride today and got into a low spot where the belt was sounding like it slipped a couple times. Also wouldn't let me full throttle to get out. Not sure if that's just from the...
  3. Can-Am Commander
    Any thoughts would be greatly appreciated Went on a 2 hr ride in the mountains on my Commander, got it good and muddy had no problems going up hills or coming down, was heading back home and was on a solid surface road about 1/2 mile from my house, going up an average hill when all of sound it...
  4. Can-Am Outlander
    Hey folks, Cant seem to find any current post about what belt to put on my outlander max 800. I'm currently running the maverick belt but I know it needs changed. I'm get the hurky jerky when I go and belt smell. So my question is what belt is everyone using now a days. I see post for use...
  5. Can-Am / BRP
    I have a 2009 renegade 800x and i took it out today to ride it rode fine all day as soon as i got home and unloaded it from my trailer it started grinding very loud when i let off the throttle going forward it has no issues it only does it when i let off the throttle and it is a very loud grind
  6. Can-Am Outlander
    Title says it all.. I have a 2021 650 Outlander XMR and I'm curious what's the best belt to run. Upgraded the springs to run 32s and have the 31in System 310s. I've heard good and bad about Gates Carbon and lots of good about Maverick Carbon...what would be my best bet..not worried about...
  7. Can-Am Outlander
    recently my can am outlander 450 2018 has been getting water into the cvt I found out how and the metal things thay hold the pipes onto the cvt well the one the goes towards the exhaust I can’t get to I can’t tighten it or anything I can’t go Into water without getting a welt belt my belt box...
  8. Can-Am Outlander 6x6
    So, this summer I had the opportunity to do a bunch of dip netting down at the Kasiloff up here in Alaska. My 6x6 was an absolute blast in the sand and made moving gear and such a breeze. It also proved very helpful in helping people get out of the sand. With a tiger tail and my low gear I...
  9. Can-Am Maverick
    Replacing the belt on my "new to me" Maverick. I would really like to hear peoples thoughts and opinions on what belt to get. I would appreciate any input I can get. Thanks,
  10. Can-Am XMR
    Good Evening Everyone, I have a 2014 Can-Am Outty 1000XMR. On my last ride, I shattered my belt. This weekend I replaced the stock belt with a new one. During the process I had to take the primary and secondary clutch off, to get old belt pieces off. Today, I went for a test ride and noticed...
  11. Can-Am Outlander
    2013 outlander 650 with a 840bbk what's the best belt choice I'm pretty sure my stock one is junk. I'm between the dayco xtx and the gates GForce carbon I'm a very aggressive rider with high speed trail riding as well as mud.
  12. Can-Am Outlander
    I'm planning on adding some 28" mud/snow tires to my 2014 outlander 1000 and after some research I realized that I need a clutch kit. I was told all I need are new primary clutch arms and a primary clutch spring. From what I understand Dalton Industries is a good brand and I'm leaning a little...
  13. Can-Am Maverick
    So I just picked up my maverick this weekend from the dealer. They replaced my starter but now it pulls at idle as soon as you take your foot off the brake. This makes it almost impossible to shift from forward to reverse. What did they do to me? If they were open today I would take it back
  14. Can-Am Outlander
    Just wondering if anyone cleans their clutches on regular basis? Im going to clean mine soon and had some questions about it. Can i clean with inner halves of primary and secondary still on machine?
  15. Can-Am Outlander
    Hey, im new to Can Am just got one about a month ago and was wondering if it is normal for it to stumble until about 5mph, like the belt isnt hooking up. It shakes the whole bike a little. Is this normal or...? BTW i have 2006 outlander 650 xt
  16. Can-Am Renegade
    I have a 2009 Renegade 800. Just put big tires on it. I smoked the belt once. Rode fine since went in deep mud and the tranny sounded like it was skipping gears. Then today it did it in any gear and any speed. Tore cvt cover off and clutches the came v 810 behind the secondary had crack marks in...
  17. Can-Am Renegade
    I have a 2009 renegade 800. I have 27 black diamond xtr tires bit heavy. Was looking into a clutch kit. Everyone talks of clutch engagement what is that and what does it do and how do I know when it engages. Also with the clutch kit everyone is saying a tan spring, will this work for me I...
  18. Can-Am Renegade
    Im having a problem with my renegade 800x. For some reason the bike is only topping out at 51 to 52 mph and starts to over rev. Don't understand what the problem could be. I changed the bearings in the primary clutch and also changed the spring from the primary. Does anyone know what the problem...
  19. Can-Am Renegade
    Hey gang, Went out for a winter run today with my Can-Am 800 Outlander with Apache Tracks. About 30 minutes in, I noticed a burnt smell coming from the belt drive air intake and the cover was quite hot. I've never burned the belt and haven't changed it in a couple of years. Could the extra...
1-20 of 26 Results
Top