Looking for some advice as to why both of my rear axle boots at the diff are hot and inflated/swollen. Just replaced the right axle yesterday due to breaking the previous one which was inflated as well. I’m worried about breaking this new one. Anyone have any idea what’s going on?
Okay guys so I have a 2016 renegade 1000 xmr. Is it possible to use a front brake caliper for the rear? I have a bad rear brake caliper and I have an extra front caliper so I’m wondering if the front one will work. It looks like it would bolt up completely the same. Everything looks to be the...
So I got my quad back from the dealer having codes read as to why my DPS isn’t working. Down below you’ll see that most of the codes are caused by low voltage. Can anyone help me out on why I could be getting low voltage across multiple things?
I have a 2020 Can-am Outlander Max XT 1,000. I am looking for some new tires and I found some Outlaws that came off of a Polaris Highlifter. They are 31/9.5/14. Will these fit my Can-am?
I have no lift on the Can-am, trying to avoid the lift if possible.
This is not my picture but these circled spots are lit on my renegade and there is moisture in the gauge and can’t tell what they are 2 on the right are green and one on the left is red can someone tell me what they mean?
I’m new here, I have a 2013 outlander with 4200 miles on it, there is this ticking coming from the right side of the bike and the ticking gets faster the more rpm you give it, could this be the timing chain? Would I just have to adjust the tensioner? Also how do I post a video on here so you...
Hi everyone, I’m new here. My names Jeremiah and I’ve got questions for the gurus. I just purchased a used 2013 can am outlander 1000max xt with 587 miles.
I took it on a 30 mile ride and holy crap compared to my old Honda 420 it’s unreal. So my question is, can someone give me the rundown on...
With a bit of bit of thinking and mocking up old racks from the local dump, I mounted a Yamaha Grizzly 700 rear rack with a cross member from a Honda TRX 350 onto the front end of my Can Am Outlander XMR 1000R.
I've also added Honda TRX 300 fender extensions to the front and rear.
All in all, I...
After the trip I noticed that the oil level in Can am xmr 1000r has increased. Looks like the fuel has gotten into the oil. What shall I do? Maybe someone can help. Xmr only 19.5 engine hours.
I look forward to your reply, I will be grateful
So I want to get my 2018 Outlander 1000 xmr tuned. Unfortunately the Power Vision 3 only goes to 2019 and it does everything I want done. Does anyone know of a similar product or what I can do beside sending out my ECU I don’t really want something that has to stay plugged in. Thanks!
I have a 2014 can am outlander xtp 1000, I bought it last spring and has been nothing but issues. 3 Months into owning it the Cluster started cutting in and out and reading communication failure. Got the cluster replaced after waiting 6 months for Cam am to get it in for me. code was still...
They dealership just installed a new ecu on my can am renegade xmr 1000 2020 and they cannot get the bike to allow the key to be programmed so I figured I’d take some initiative to see if anyone on here knew anything so I could help them. Thank you
Was wondering if anyone knows if the can am outlander 1000r 2021 can start In gear or neutral?
because my can am only wants to start in park even if I try and hold the hand brake and foot brake on neutral it won’t start any solution?
I’ve got a 2018 Renegade that occasionally won’t start.. it will start 10x in a row then say the next time it won’t get power. The starter will engage and spin the motor but the dash lights fuel pump ect won’t work. Can actually take the dess key out put the kill switch in the off position and...