Can-Am ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 161 Results
  1. Please Introduce Yourself
    Hey Can-Am Forum! Excited to be here and interact on this platform. I love to get outdoors & off-road. I'm a part of the Rough Country team so if you have any questions about Can-Am machines that I can assist on, please reach out. If I don't know the answer, I have access to a lot of...
  2. Can-Am Defender
    Hey guys looking for some help. Ive got a 2016 can am defender hd10, my front passenger axle keeps popping out, sometimes only after 15 minutes of riding. the bike is basically bone stock, no lift, but the stock shocks are maxed ou so far I’ve looked over the suspension, as best I can anyway...
  3. Can-Am / BRP
    I have a 16 renegade 1000 xmr and wondering if anyone has a Napa or autozone part number for rear driveshaft ujoints thank you
  4. Can-Am 2016 Models
    Hello! I have a can I renegade 850 2016 red without power steering from the factory. What are all the things I need to have a functional power steering on my ATV? Thanks!
  5. Can-Am Outlander
    Does anyone have a link to a part number for the radiator relocation clamps that are provided with the can am outlander relocation clips. The shop I took mine too said they were to small (Broke one while installing it) and I really want to get the proper hardware installed.
  6. Can-Am Outlander
    So I got my quad back from the dealer having codes read as to why my DPS isn’t working. Down below you’ll see that most of the codes are caused by low voltage. Can anyone help me out on why I could be getting low voltage across multiple things?
  7. Can-Am Outlander
    What is the deepest I can go in a can am outlander 570? I believe all of the intakes are under the pod beneath the handle bars? I do not have it snorkled but wanted to make sure I was not missing an intake. Thank you.
  8. Can-Am Outlander
    ordered aftermarket MSA wheels, the fitment and spacing is correct but the stock lug nuts for the outlander barely fit in the new wheels 'hole'. was wondering if anyone on here ran into this problem and what the solution was, is there a kit that i can purchase where with skinnier lugs that...
  9. Can-Am XMR
    2022 xmr 850. Going to be running 32x10x14 silverbacks. Anyone have any Recommendations on clutching? Havnt really messed with clutching before.
  10. Can-Am / BRP
    I’m having an issue with my rear driveshaft stuck on the output shaft of the transmission. I tried torching it and yanking it with a ratchet strap already. Anyone have any tips? Can am renegade xmr 1000 2020
  11. Can-Am Outlander
    I’m new here, I have a 2013 outlander with 4200 miles on it, there is this ticking coming from the right side of the bike and the ticking gets faster the more rpm you give it, could this be the timing chain? Would I just have to adjust the tensioner? Also how do I post a video on here so you...
  12. Can-Am Defender
    Hello, I am looking to replace my front shocks myself. Not the most mechanical but think I can do this. Tried finding videos but not having luck. Can anyone walk me through it or have a video link? I just got the new factory shocks. I have a 2021 Can am defender max. Thanks in advance
  13. Can-Am Outlander Does anyone know why my clutch is making that noise in the video above? ANY help would be appreciated, it’s an 07 OUTLANDER 650
  14. Can-Am Outlander
    Hello, I'm curious if it is possible to somehow upgrade the guage on my 2010 outlander 800r xtp to a guage that has a traditional cluster, I believe the 2013 XTP guage is the one I'm looking at. Thanks in advance for any help
  15. Can-Am Renegade
    Anybody know where I can get the can am sticker for the side of the front hood of the renegade? My dealer broke my hood and the replacement didn’t come with one.
  16. Can-Am Outlander
    Hey all, Hope you all have been well, i was curious if anyone knew what the kit would be called that fits the area in the attached picture. It looks like lights might go there on a different trim model. I have a outlander 650 max dps. Been searching all over but haven’t found anything...
  17. Can-Am Outlander
    So I'm waiting in the endless line of getting that delivery update from my dealer for the new outlander XMR 850 2021. I live in Canada and have done some research on exhausts to choose. I heard HMF provides more power but lower built quality. While RJWC provides less power but more build...
  18. Can-Am Outlander
    I just am reaching my 24 hour point in my new quad and im going to order for the full service. But I cannot not find anything for what fluids to put in the transmission and the differentials. Im not sure what to order for them any help? It is a 2021 outlander 850 xtp
  19. Can-Am Outlander
    So my screen stopped working to where it only lights up and if it does show letters it just says rrrrrr... so if I get a new screen can the dealership find my miles and my hours on the ecu.
1-20 of 161 Results