Can-Am ATV Forum banner


  1. Can-Am 2014 Models
    I have the 2014 with the air shocks and the compressor is not working anymore. I was wondering if anyone here could tell me how the deleted the air system and just put air valves on the shocks and pumped them manually. is there a specific size of valve I need? Thanks for your help.
  2. Can-Am DS
    Hey I have an ds 450 2008 Today I go for a ride After couple puddles and water engine light start blinks ,the quad run perfect and drive good When I go to a big puddle it turned off I try 3 times to strat and it finally start Any Ideas what it means?
  3. Can-Am Outlander
    Im looking into getting an outlander XMR. Now i know this version is MEANT for the mud. But im not into going in mud holes. Just puddles, rivers, rocks and trail riding. I personally love the look of the xmrs and i want that one. Im stuck between if i should get a 650 or if the 570 will be good...
  4. Can-Am Renegade
    I want to buy some fender flares for my 2007 Can Am Renegade 800 and I can't find a lot of options for fender flares. I found and they sell them but not sure if they are reliable? Does anyone know any reliable site to buy fender flares for my four wheeler?
  5. Can-Am Renegade
    Anyone know where the problem is ? i also tright removing my CVTECH and secondary and put the original CanAm Clutch main / secondary on it still same problem but not so loud, my guess is the transmission or is it normal? it only comes when putting it in gear like H/L in Neutral it is not there...
  6. Can-Am Outlander
    I watched a couple videos of how to take the primary off and they made it look easy and so Right now I have the bolt half way off and the clutch isn’t coming out and I tried hitting it with a rubber mallet like a video said and it’s still stuck and then I pulled on it and it’s still stuck and...
  7. ATV Reviews
    This is an unbiased, independent review of a new 2019 Outlander 650 Xmr with the G2 chassis and added 2019 features. Being a pretty loyal Honda guy, I was a bit apprehensive to move to a Can Am to say the least, after having plenty of Honda power sports and equipment use under my belt. Now the...
  8. Can-Am Maverick This information will assist you with fully utilizing the high-quality shocks on your Maverick X ds. Here is an overview 1 of available adjustments. This example list of shock settings is representative of a 2 setup used by a driver in dunes...
  9. Can-Am Outlander
    anyone else expierencing the front shocks blowing out on the new 2015 xmr 800 or am i just riding too hard? theses are not the air shocks for anyone wondering just the regular shocks wondering if it has anything to with all the added weight, with what look to be the same shocks as the stock...
  10. Can-Am Outlander
    I just recently purchased a 2006 Bombardier Outlander 800. I don't plan on riding hard all the time just mostly back wood trails and maybe do a bit of mudding here and there. I understand that these things have weak frames as well as some other minor issues. What would you folk recommend I do...
  11. Members Rides / How To Videos
  12. Can-Am Renegade
    I have a 2014 can-am renegade xxc1000. No real mods, just bumpers and rack and tires. I was in a real bad wreck with it. I was doing around 50 mph when a friend of mine pull in front me on accident and I rolled the back. The bike rolled multiple times on a dirt road. The handle bars broke, gas...
  13. Can-Am Renegade
    So I bought part #420850055 oil seal under drive shaft because my Renegade was leaking oil where the drive shaft enters the front of the engine, took everything out, changed it out to find out the seals inside diameter is waaaaaaaaay off, not even close to being tight enough for the shaft? This...
  14. Can-Am Renegade
    After having to replace the weep hole seal, I followed instructions from a video on YouTube on how to install everything, but after I put everything back together and tried adding coolant it just went right out the weep hole? What would that be caused from?!
  15. Can-Am Renegade
    Well, my driveshaft seal on the front of the engine is leaking out oil, got the new seal, just wondering how hard of a job this is, some people say you have to pull the whole engine, It's a 2012 renegade 1000xxx, only 700 miles... I've always had problems with seals and It's pretty annoying...
  16. Can-Am Renegade
    I'm about to do the override switch for my fan on my renegade, but can anybody tell me what wires it is? I've heard multiple wire it's supposed to be, just want to make sure before I splice into things
  17. Please Introduce Yourself
    Alright so I have an 06 john deere buck that has the viscolok 4 wheel drive and I heard that you have to change the timing on it if you put a different ratio of tire sizes on it but Im not sure what to believe. All I pretty much know bout the viscolok is its fluid driven can someone help me out...
  18. Can-Am Outlander
    hey, i was wondering what any of you guys are using for cheap pipe lifts? and would my ride look wierd with 28 in zillas and a 1-2 spring spacer?
  19. Can-Am Outlander
    Hey, im new to the site and have a question. I am planning on getting an HMF Swamp Series exhaust for my 2007 Outlander 500 XT. I read on HMF's site that you should rejet your quad first. So should I? Extra Info: I am also planning on getting a K&N air filter, the atv is all stock except for a...
  20. Can-Am Outlander
    I'm not trying to hate but this is ridiculous This is an atv/motorcycle magazine and they didn't even take the time to learn the facts about the machine:th_wtf: