Can-Am ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. Can-Am / BRP
    Hi everyone, I recently swamped my 2018 renegade 1000 and going through the process of getting all the water out. Engine is clear of water now but the diffs and transmission still come out milky after 8+ oil changes and blowing out all the vent lines. Even filled them with diesel twice. Not sure...
  2. Can-Am Defender
    Has anyone had a complete failure of the Smart Lock features on their XMR's? I am able to move the switch from 2wd to 4wd, and I hear the servo motor run, and I verified that I do have 4wd functioning, and see the 4wd indicator on the dash with 4 wheels all black. However, no messages on the...
  3. Can-Am XMR
    Searched and couldn't find much to any info on this. I have attached pictures of the area. No noises, nothing wrong while driving. Parked in the shop overnight and see oil on the ground. Look under the quad and see that oil has been sprayed on everything coming from the rear diff area. Looks to...
  4. Can-Am 2016 Models
    just some rebuild information for guys that need torque specs etc https://youtu.be/m_uxOfYd5B4
  5. Can-Am XMR
    Hi, I'm trying to rebuild the rear diff. I have all the parts including shim kit. can anybody advise of the specs, lashing etc. If anyone has a service manual to be able to help.
  6. Can-Am Outlander
    Hey guys, new to the forum and new to can am, drove a 1991 300 honda prior to upgrading to the 800 outlander and love the machine. However, the maintenance is much more than what I'm used to. I changed the front and rear diff fluids today, and according to the manual you are supposed to fill the...
  7. Can-Am Maverick
    I have a lot of Maverick parts for sale. They are all off of a 2014 Mav Max Xrs. All parts have approx 600 miles unless otherwise listed. (closer to 350 because speedo was off due to tracks) all power and drive line parts are available. Please email me if you are looking for something that is...
  8. Can-Am Outlander
    Im sure its on her somewhere, but i cant seem to find it. I was wondering i just bought some Walmart gear oil, 75-90 and 75-140 will these be suitable for my ATV? GL5 spec and synthetic blend. Also will any motor oil work in these? Got Syngard 5w30 full synthetic in it now. Is this ok?
  9. Can-Am Commander
    I have a 2011 x, since purchasing it new I have had several problems with the 4 wheel drive. The latest of which was that the passenger tire would pull but the drivers side would not engage. My dealership informed me that the differential was out. I replaced it with a QE and the first ride...
  10. Can-Am 2012 Models
    I was greasing my 2012 Outlander 800 tonight and I notice a small crack on the rear differential house where the hitch mounts. It looks like a minor crack but it's still a crack. Has anybody else seen this?
  11. ATV Product Reviews
    If you're looking to clean you diffs/engine/skid plates/ or anything that is aluminum this is the stuff to get! Can't believe how good it works. Everything looks brand new again. It even changed my tie-rod color lol [/IMG][/IMG][/IMG][/IMG][/IMG][/IMG][/IMG][/IMG]
  12. BRP Traxter / Quest
    I am having a problem in low range. It started with a clunking sound then appeared to try to shift back and forth and going into neutral. ( was in 3rd gear light kept displaying 3 and no flashing or changing. ) It sounds terifble but it is not consistent, it acts up and then works fine. I...
  13. Can-Am Outlander
    Hello this is my first post as i just got an 05 outlander xt 4x4. After changing the differential oil, motor oil etc I decided to put a couple of pumps of grease in the grease certs of the u joints and found that a typical grease hose cant get in there..Is there some trick or special grease tool...
1-13 of 13 Results
Top