Can-Am ATV Forum banner

efi

  1. Dobeck AFR+

    Can-Am Outlander
    Been doing some research and I think I am going to pull the trigger and purchase the Dobeck AFR+ for my 850 Outlander Max. Main reason is I am upgrading the exhaust (like the LTE the best from what I have seen). I know there are other posts about this topic but I haven't seen any one give a...
  2. G1 ecm with efi motor

    Can-Am 2009 Models
    I need to replace the motor in my quad it's a g1 renegade 800 ho There's a 2011 engine in my area rebuilt 800 efi Will my ecm work with the newer engine ?
  3. Gen 1 Outlander 500 Front Diff

    Can-Am Outlander
    Does anybody know if the front diff is supposed to be locked on my 2011 Outlander 500 EFI? It isn't locked when going forward but seems to be locked when I put it in reverse to back out of a hole. Is there something wrong with it? i was thinking I read that it had a locked diff but its...
  4. outlander 650 xt diodes

    Can-Am Outlander
    NEED HELP ASAP!!! is it ok if i run my outlander on 1 diodes unless of 2 ? my friend needed 1 for is atv so i lended im one but i need my atv for a ride and i noticed that it starts and run fine only on 1 diode is it ok?
  5. Outlander 650 xt 2008 problem!

    Can-Am Outlander
    Hey guys, i was taking my outlander out for a ride in the snow but i got stuck. It was writing low battery on the gaudge but i needed to use my winch and wheni hooked it on tree and pushed the button after like 10seconds it stalled and now i charged the battery and it wont start. Checked the...
  6. DS 450 fuel pump problem

    Can-Am DS
    Hey, i just recently bought a 2008 ds 450. This is my first fuel injected bike. The bike fires up with starting fluid but will not run without. The fuel pump was not cutting on so i pulled the connection of that powers the fuel pump an used a volt meter to figure out that the 2nd to the bottom...
Top