Can-Am ATV Forum banner

electrical

  1. Hi-new to forum, hoping to find some help!

    BRP Traxter / Quest
    Hi, New to forum, nothing like a new "friend" that asks for help right-away! I have a 2006 John Deere Buck 500 EX, basically a rebadged Traxter 500 if I understand my history. Has the auto/manual shift tranny. The machine has been sitting for 3 years, probably has 50 miles total on it since...
  2. Quest Electrical

    BRP Traxter / Quest
    Hello, I have 2002 Quest 650XT and the Inductance Coil 710000317 seems to be bad and I have replaced it. The wire going to the solenoid will start to melt when it is hooked up to solenoid. I have replaced the solenoid but no difference. What is the Inductance coil for? Can I leave it unhooked as...
  3. 09 renegade overheated and now wont turnover and start

    Can-Am Renegade
    Hey guys, I'm fairly new to the can am family, I only bought my used renegade about 3 months ago, since then I have went on one pretty good ridea on which my renegade overheated and went into limp home mode and spit out a little antifreeze.. it then cooled down and I had no issues the rest of...
  4. ds650 regulator/rectifier placement

    Can-Am DS
    I have a 2002 DS 650 baja which recently the regulator failed which fried my CDI box. I purchased a new CDI box and a new regulator and the wires for the regular they sent me were much shorter than my stock regulator. I was wondering if there any alternative placements for the regulator where it...
  5. DS450x Stator

    Can-Am Service Bulletins /Recalls / How To
    I am having an electrical problem. When I turn the key to the on position, usually you can hear the computer kick on and see the neutral light, light up. I have nothing. I have continuity at the voltage regulator connector, and now i'm having a hell of a time getting access to the stator...
  6. Can am Outlander Speedometer problem

    Can-Am Outlander
    Hey so i ride a 2007 can am outlander and my speedomete does not work anymore. it is not digital the only thing that works is the RPM gauge thats on the very bottom can any help me how to fix that?
  7. No ECM Communication

    Can-Am Outlander
    This is my first post, I've searched all the threads relating to this issue but none seem to be the same problem as mine. I have a 2007 Outlander 500 MAX XT. Starts Fine, seems to run fine ( although I have not driven it anywhere ) all my electricals work, lights winch, gage lights up and...
  8. 2001 Traxter electrical issue

    BRP Traxter / Quest
    Hi, I'm at my wits end on trying to find my electrical issue with my Traxter 500. I stored it last winter at my cottage and when I tried to start it in the spring, the ignition would not work.. Turn the key and no dash lights or lights of any kind. So , first up I replaced the battery as...
  9. Magneto Upgrade

    Can-Am Outlander
    Does anyone know if it is possible to upgrade a 2009 800 outlander from the 400 Watt magnetto to the new 650 Watt? Has anyone tried?
  10. Electrical system getting worse and it's not even running!?

    BRP Traxter / Quest
    I live on an island in Alaska with no Can-Am mechanic and I'm not about to crate it and ship it off for repairs! I can fix most things but this has me vexed. Any suggestions here would be appreciated. Vehicle: 2005 Traxter max xt 5 speed 1: Installed new battery at 1006 miles. 2: One trail...
  11. Electrical Issue - Ignition wiring ?

    Can-Am / BRP
    Need some help folks....please. Can't get solenoid to activate and create current to the starter. Quick scenario (after re-read not so quck) is I purchased a used 06 Outlander 400 XT that had some issues. After buying it I noticed some mice got into the wiring and chewed a few up under the...
Top