Can-Am ATV Forum banner


  1. yoshi exhaust on 570 renegade?

    Can-Am 2019 Models
    I have a 2019 renegade 570 base model and I want to put a yoshimura bolt on exhaust on my bike but some places say you can't on 570 or xmr models. Anyone know why that may be? I've seen people do it and of course I would get a fuel tuner if I did get one. Thanks!
  2. MBRP Exhaust. No fuel programmer needed?!

    Can-Am Outlander
    I just bought a MBRP single slip on exhaust. Part number : AT-9209PT to put on my 2018 850cc Outlander. They clam you don't need a fuel programmer for this slip-on. Was wondering if anyone else on here was running one with or without a programmer. Thank you!
  3. 2005 DS 650 CDI/Exhaust

    Can-Am DS
    I recently purchased a ds 650 that doesnt fire, was curious if anyone had a spare oem CDI box they would like to sell? Also in need of the oem exhaust that has the DS650 emblem on the side.
  4. Does the 2018 XMR Still Suffer The Heat Issue

    Can-Am XMR
    I have read all over the internet about the left side of the XMR getting hot and melting the plastics and/or the seat. I now own a 2018 XMR 1000 and based on what this post turns up I will be ordering the materials to wrap the exhaust and protection for the plastics and air box. This week...
  5. Back to stock exhaust.

    Can-Am XMR
    Hi all, I have a looney tuned exhaust with a power commander 5 tuner on it. I am just wondering if I put my stock exhaust back on for hunting season and leave the tuner installed if it will harm anything? Thanks. Also what happened to the search function? When I search for anything I get...
  6. renegade 1000 exhaust

    Can-Am Renegade
    Hey I've recently picked up a 2015 Renegade 1000, has the power but not the noise! Im looking for a new exhaust, I'm thinking RJWC or HMF... input??? which exhaust? slip on/full??? thanks
  7. Please help!! 650 max!!!

    Can-Am Outlander
    OK so here's my story.. I got a 2010 650 max XT. it has a duel looney toon exhaust, looney toon programed, works shocks, snorkel kit. still on stock tires, now my question is.... when I go deep in the mud hole, exhaust under water deep, Goin slow cause of the mud... I'm watching my RPM's...
  8. Programmer with snorkels and exhaust??

    Dyno Reports | Tuning Center
    I have a 2012 outty 1000 with snorkels (1.5" under pod 2" above) slip on exhaust, and stock air filter. Can I run this without a programmer? I have read many many many post and discussions about this, and not found an exact answer. I know it will not run 100% power, and I know I won't be...
  9. Can am 400 question

    Can-Am Outlander
    27 inch silverbacks for a 2007 outlander should I buy an exhaust or clutch kit
  10. Xmr 2015 exhaust leaks

    Can-Am XMR
    Hi, Anybody ran into this problem on an xmr getting an exhaust leaks when going into deep water enough to cover the entire exhaust. When i enter the water there is no abnormal noise and as soon i get out of water i can heard a very loud noise like if the header was broken. Removed the exhaust...
  11. Anyone running hmf swamp series exhaust?

    Can-Am Outlander
    I have an 14outlander 800 stock exhaust I'm looking for an aftermarket hmf swamp series exhaust with the fuel tuner to give me a little more power. I do not want a loud exhaust I do alot of night riding and don't need to upset people. So can anyone tell me how much of a difference in sound it is...
  12. Renegade, need a tuner?

    Can-Am Renegade
    My renegade seems to be a little boggy with my two brothers exhaust on compared to stock, I emailed two brothers and they told me a tuner wasn't needed, my shiftout is only about 7000 with the two brothers exhuast on... Should I get a tuner?
  13. its all new

    Please Introduce Yourself
    Hey guys(and gals). I'm new to this forum.... and forums in general. Looking at buying a 15 xmr 1000. I grew up on Honda's so its a big change for me. Have to say i'm excited for the change. Pretty well set on the xmr. Just wondering what guys are running for exhaust. Dealer tell me the two...
  14. exhaust

    Can-Am Outlander
    Anyone running a Big Gun Evo exhaust on a 800r? If so let me know what you think of it
  15. Looney Tuned Exhaust

    Can-Am Outlander
    Any one know where I can get some looney tuned exhaust? Their website is so broken and useless right now and I am thinking I want to get a slip on pipe and programmer for my 08 outty 800 spring mount. I tried calling them but I got nothing and an eBay search was pretty sparse. Any help would be...
  16. Outlander 800 Exhaust.

    Can-Am Outlander
    Quick Question guys... Does anyone know if the 800, 800XT, and the 800 MAX all have the same exhaust system? Reason I ask is Im looking into a slip-on and the ad says will fit 650 800r 800xt Max... I thought the MAX would have a longer exhaust but i guess it could just be longer between headers...
  17. 08 Outlander 800 exhaust question

    Can-Am Outlander
    Hey guys, just picked up an 08 outty 800 last week and I'm loving it! I really want some exhaust on it though, I'm leaning toward a muzzy or looney tuned slip on and I was just wondering if I need it should have a programmer to go with it? Any input would be awesome guys thanks!
  18. HMF Slip-On turn out Help

    Can-Am Outlander
    i just purchased a used hmf slip on for my 2007 500xt, the only part missing is the turnout cap. should i order the turnout before i ride it? i wont be riding it much since i can take out the REV instead. but just to try it out, will it run too lean without the turnout?
  19. 2013 800xt pipe without programmer?

    Can-Am Outlander
    I have a 2013 outty 800xt. I want a slip on HMF swamp series. NOT XL. Anyone do any real tests to see how the machine is running (lean/rich) with out a programmer? No well it worked for me kinda answers haha. I want a slip on that is close to stock but a little better tone. I took the spark...
  20. Excessive noise?

    Can-Am Outlander
    I have an outlander 650 and it sounds like something rattles when I rev it up a little and also seems like there is some noise from cylinder could that be the valves, not exactly sure what they are supposed to sound like.