Can-Am ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Can-Am Outlander
    Hi all, I'm relatively new to Outlander and one of the 1st things I wanted to do by myself (besides cleaning obviously) is greasing the joints. I wasn't able to find any solid point of info with all the details so I decided to put up this post after I finished. Useful things to know when doing...
  2. Can-Am Outlander
    I know that there are 16 points that need to be greased, i am looking for any tricks you guys have to make it easier. I have hear anywhere from an hour to 15 mins to do them all. Also if you guys use a certain brand that you like. Thank You!
  3. Can-Am Outlander
    After seeing a few others here LIFT their machines to gain access to grease etc underneath, I got up into the Attic area above my 10' high garage floor. I bolted a 2 X 6 and two 2 X 4s across and above two ceiling/roof joists (24" OC) and dropped a HEAVY CHAIN down a hole in the center and...
  4. Can-Am Renegade
    Hi, I have a 2014 Renegade 800R and i did my first service today and i greased all of the grease fittings expect one, the U-joint near the gear box i just cannot fit my grease gun on the fitting... Does anyone have the same problem?
  5. Can-Am Outlander
    Outlander 800r xmr has 11 grease fittings / zerks. Outlander 800r xmr has 11 grease fittings / zerks. Outlander Grease fittings Front A-Arms # 11a Part # 408200600 Greases Fitting 2 # 11 TV Part # 408200700 Grease Fittings 6 On the front a-arms, each upper has 2 and each lower has 2 Drive...
1-5 of 5 Results