Can-Am ATV Forum banner
lift
1-20 of 22 Results
  1. Can-Am 2020 Models
    I dont want to buy the 250 dollar highlifter spring spacers made for my quad, but all the other ones i have seen for a good price are for either 450 max, or 650 - 850. What can i use? Will they fit?
  2. Can-Am XMR
    Have for sale a 6 inch Catvos lift that I was running for the last year. Due to having kids it is now time to go back to stock suspension so the wife can enjoy riding my outty xmr 1000r. Lift sells for just under 4 thousand dollars, will take 2 thousand for it, and will also throw in the extra...
  3. Can-Am XMR
    Looking to modify my 17 outlander 850 XMR. Checked around and searched with no results. Has anyone had any experience with the full armor A-arms? I have read some about the PATV version and they seem to have some issues with turning radius and rotor contact, plus cutting frame to fit. Just...
  4. Can-Am XMR
    I am looking to get forward Arched A Arms for my 2016 1000 XMR Max but the i don't want the additional lift. PATV Arched arms have the additional 1.5" lift and i don't need it. As of now I fit 31x11x14 original Outlaws but I like the way forward a arms and extended trailing arms look. Are there...
  5. Can-Am XMR
    Hello all I ordered the super atv 6 inch lift for my xmr but was told that the brake lines are different. I am sure that I will get it figured out once it arrives. But was wondering if anyone has already gone through this process. Any help would be appreciated and if no one has then I will try...
  6. Can-Am XMR
    have 850 XMR. what is the best oil to use. will 0w40 work. and do I really need the BRP oil.. the mechanic I go to said he puts Mobile 1 Syn 0w40 in it. is that good oil?? also I heard lifting a bike isn't good and causes more stress on parts. However, would a 2in lift cause any stress...
  7. ATV Tech Tips
    Just bought my 4" lift, and put it on and I am breaking acles constantly. I'm looking to buy turner axlra for my machine, but they only have the old style lift kit acle specs. Since this is the upgraded kit I need to find out what the specs are for these axles. Any help is appreciated.
  8. Can-Am Outlander
    Was wondering if anyone has installed the bigger a-arms by super atv? Did it improve the ride height? Easy to install? Just general info and all that good stuff. Thanks everyone
  9. Can-Am Renegade
    This past weekend I cracked my shock on my 08 Renegade 800 and when I took the old shock off, I noticed a small, black bracket which looked like some sort of lift kit. I bought the bike used so I am not sure what it could be. The rear of the bike, however, does not seem to have any kind of lift...
  10. Suspension
    Will I acheive more ground clearance with a 2" pipe lift over a 1.5" or are they going to produce the same amount of lift just rougher ride?
  11. ATV Tires and Wheels
    I have read many forums and cant find the answer i am looking for. I am looking to clear 31x9.5x14 outlaws skinnys on my gen 2 2013 canam renegade. I have measured and should have around 3/8" clearance between rear fender with some trimming. Is 3/8" really enough room for the tires to clean out...
  12. Can-Am Outlander
    SOOO I just bought a 2008 Can-Am Outlander 650 XT...I have so many ideas of what I would like to do with it. Just looking for some advice from previous experiances on whats the best bang for your buck or what is a must have. I would like to get a lift on it. So far i found prices ranging...
  13. Suspension
    I recently purchased a 2" spring compression style lift off eBay (link Below) It said Fits all Can Am... Im assuming that the shock should be disassembled and the pipe section should go under the shock spring then reassembled like i have seen so many times... well the kit they sent me had a...
  14. Can-Am Outlander
    hey, i was wondering what any of you guys are using for cheap pipe lifts? and would my ride look wierd with 28 in zillas and a 1-2 spring spacer?
  15. Can-Am Outlander
    Hey all I got a 2006 800XT, Hoping someone can tell me how much like i can install on my bike? Id like to upgrade my springs seeing how soft the stock ones are even with them being adjusted. And while I'm doing that Id like to install a lift kit. The kits seem really cheap and i could deff use a...
  16. Can-Am Outlander
    hey, i just installed a high lifter lift kit on my quad, it was spring spacers for the front instead of brackets, but whatever. the problem i have now is that it creates front camber in the front, is there a way i can adjust that back so my tires are straight again?
  17. Can-Am Outlander
    Hey guys... I own a 13' outty 500 xt... I currently have a snorkel kit and highlifter rad kit... I'm looking to make my quad ready to go serious mudding... I ride pretty hard in the mud and ride about 60:40 mud:trail... Im looking into the 28" mega mayhems on 14" sti hd3 rims... To help regain...
  18. Can-Am Renegade
    Hi guys, I have a 08 Renegade 800 EFI X, I've just ordered 29.5" outlaw tires and I am looking for a 2" lift. Any recommendation for the lifter? pipe, high or signature? Can't understand the difference ! (can a link be posted?) Appreciate a lot!
  19. Can-Am Outlander
    Have question bout big lifts. have 2 bikes gettin ready to lift im goin 4 inch or bigger would really love some input on brand an why. it would help me out a lot bikes are 2013 can am outlander 1000 xt and a 2012 can am outlander xmr.
  20. Can-Am Commander
    Hey guys im new to the whole atv scene so i dont know much about it, i just got me a commander 800r is the base model so it doesnt have amy fancy suspension or anything i was wondering if i put a 2" lift on it with 29.5 outlaws would it rub? If so what should i do? Or what lift should i get?
1-20 of 22 Results
Top