Can-Am ATV Forum banner
outlander 400 carburetor

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Can-Am Outlander
    Wasted several hundred more dollars at my local ‘st’dealer… but let’s step back a bit. Early this summer I had the quad stall on me in the lake a ways and wasn’t able to get it started. Checked things out and I hadn’t actually swamped it. After letting it dry out, I was able to pull start are it...
  2. Can-Am Outlander
    Has anyone found a Lectron Carburetor that will work with an '06 Outlander 400 Max? Stock carb is a Mikuni. Lectron rep says they don't make a model for Can AM, but wondering if another model can be adapted. Want the Lectron for High altitude use and simple no-jet design.
  3. Can-Am Outlander
    Hey guys, So just recently replaced all fuel lines, carburator, and fuel tank grommets, and new gas. Cleaned the air filter on it and after putting everything together it fires up and runs great when cold. After getting to operating temp or warmed up when you give it throttle it will...
  4. Can-Am Outlander
    Hey guys, So just recently replaced all fuel lines, carburator, and fuel tank grommets, and new gas. Cleaned the air filter on it and after putting everything together it fires up and runs great when cold. After getting to operating temp or warmed up when you give it throttle it will...
  5. Can-Am Outlander
    Hello All, Searching for some help with my 2006 Outlander Max 400 (Carb). Sorry ahead of time for the lengthy read but needed to explain my situation. This past weekend I started the day with a 1 hr trip, then stopped for 30 mins, then off to the next stop, no problems starting, but had a...
  6. Can-Am Outlander
    How to I remove the carburetor from a 2005 Bombardier Outlander 400 xt
  7. Suspension
    I purchased a used 2008 Outlander 400 for my wife last year. I noticed the suspension was pretty soft and sags significantly in the rear. I tried to adjust the rear shocks and couldn't get it to budge, even with the rear jacked off the ground. I wanted to upgrade the shocks on my 2007...
  8. Can-Am Outlander
    My wife's 2008 Outlander 400 desperately needs some low end to mid range torque. It is stock other than new Kenda 8 ply Bearclaws. I assume a clutch kit may be one way to go. Any suggestions for a clutch kit or any other suggestions. We do mostly trail riding in the Northeast. Not a ton of...
  9. Can-Am Outlander
    I have a 2005 Outlander Max 400 XT. Suddenly, gas started flowing from the carburetor overflow tube (assume that is what it is - hose from top of carb) like a water faucet with a stream down the engine. I thought "stuck float" and added Sea Foam to the fresh gas and tapped on the carb with a...
1-9 of 9 Results
Top