Can-Am ATV Forum banner

outlander 400

  1. Skid plate options for a 400 XT

    Can-Am Outlander
    I'm looking for the plastic skids for a 2012 outlander 400 EFI XT. Many of the sites I've searched only show options for the 500 and up. Even BRP site says for the G1 400 contact local dealer. What's available for the 400 and why is it difficult to find?
  2. Carburetor Removal 2005 Bombardier Outlander

    Can-Am Outlander
    How to I remove the carburetor from a 2005 Bombardier Outlander 400 xt
  3. 2005 outlander 400

    Can-Am Outlander
    I need a wiring diagram for my 2005 outlander 400. Im needing it for a problem im having. Anyone out there that can help?
  4. 2005 Outlander 400 max xt strut to a arm conversion

    Can-Am Outlander
    What parts are needed including the extra parts needed over the 500 strut conversion,has anyone done this to there 400 and how do they like it in comparison to struts that are in good working order,thanks.
  5. bearing help please

    Can-Am Outlander
    im am trying to replace my rear wheel bearing on my 04 outlander 400. I get the snap ring out. it looks like it come out the wheel side, but I can not get it to move. am I doing it wrong? what do I need to do to get it out? I need to get it fix fast. any help please.
  6. Windshield for outlander 400

    Can-Am Outlander
    I'm looking for a nice looking windshield for my '13 outlander max 400. I see can am makes one to fit that machine but it's not the nicest looking thing. It shows on their website the hi windshield that is more fairing like that you can get in different colors says all outlander models. I'm just...
  7. rear input shaft seal

    Can-Am Outlander
    i have put two rear diff input shaft seal in, in around 4 weeks it is leaking again. what is wrong are what am I doing wrong? it a 04 outlander 400 std
  8. Kolpin Gun Boot 5.0 on 2013 Outlander 400

    ATV Product Reviews
    I just bought one at Cabelas. Has anyone mounted one of these on a 2013 2 up Outlander 400. Any comments good or bad? It looks like it will work??? Thanks!
  9. Can am 400 starter noise

    Can-Am / BRP
    Ok i have a 2005 outlander 400 xt we did a little mudding and at the end of the day the starter started making a high pitched squeal we are planning on getting a 650 xmr but still want to figure out why it is doing this and would rather see what you guys have to say than travel 3 hours to a dealer
  10. Outlander 400 snorlel?

    Can-Am Outlander
    I dont have a snorkel but really want one. I would like a kit that has everything. Needs to have air box and cvt intake and output. anyone done this before? Let me know thanks
  11. Outlander 400 Clutch Kit??

    Can-Am Outlander
    Hey guys, i have a 09 outty 400 and love the power but would like a little more out of the whole snap. Anyone know of a good clutch kit for the 400?? Have any opinions on the dalton kit? Thank you. Great machine but needs a little more bang! :aniwheeler6:
  12. 04 400 outlander problems

    Can-Am Outlander
    ok guys, i sent the bike in to a dealer and they dont now what wrong. it still will start running bad and back fire after riding it for around a hour our two. i have change the plug and the dealer repair the cab. can anybody help?
  13. 05 Outty 400 acts like its running out of fuel

    Can-Am Outlander
    So I got this thing a few weeks ago. didnt run. I fixed some minor issues with it and now it starts right up and idles/runs fine for about 10 minutes give or take. I can cruise WOT or just putting around the ranch for about 10 minutes then it starts to bog and cut out like its running out of...
  14. Possible new Can Am owner

    Please Introduce Yourself
    Hello all! My name is Chris and I am from Kentucky. I am in the market for a good used quad and I ran across a 2004 Can Am 400 HO XT Outlander for $2500. It has new tires, workable winch and is a 1 owner atv with 471 miles on it. I have always been a Polaris man but this seems like a good...
  15. compression 400 outlander

    Can-Am / BRP
    I have got an 06 outlander that won't start and was trying to check compression but the book doesn't give what it is supposed to be but the other thing is will it be lower if the compression relief valve has shut yet. Please help this is driving me nuts. If anyone could help I would greatly...
Top