Search Results for ‘overheating’

Hey all, new to the forum. I recently purchased a 2011 Can-Am Outlander 800R XT - ran and looked great on the surface when I went to see it, until I started pulling apart for inspection when I got it back home.. Performed compression test and got 210psi on front cyl and 170psi on rear cyl...

Hello everyone. I have read all of the forums and tried everything to get the overheating and limp mode to stop. I flushed out my cooling system and put in engine ice, did the bleeding procedure, installed the hayden fan mod, cleaned my radiator fins, made sure they were not swollen, ran a...

I really wanted a factory rad relocate but for $560 Canadian, i wasn't ready to fork out the wallet especially when i could build something similar. It started out with scrap trampoline pipe which is the same thickness as the OEM bumper, then with $20 in mesh and flat bar i made the front and...

Hey folks, Looking to relocate my radiator. I'm thinking about getting a Wild Boar kit but courious to see what others have used. I have a 2015 Outlander max 800r DPS. Tired of playing in the mud and quad going into limp mode cause of over heating. If you used a kit please let me know if...

Ok so I have had my 08 Renegade 800 for about a year now and I love it, great bike, wouldn't sell for anything. However the past few months the bike has been displaying a "Check Engine" message on the display, and I figured out it was because the cooling fan was not turning on. So far I have...

Hey guys, I'm fairly new to the can am family, I only bought my used renegade about 3 months ago, since then I have went on one pretty good ridea on which my renegade overheated and went into limp home mode and spit out a little antifreeze.. it then cooled down and I had no issues the rest of...

Hello I am new to this forum and was wondering if you guys could help me with my problems. I have a 2006 Can Am outlander 650 that i just bought and it has an overheat problem. It overheats after about 30 minutes of riding it, also on initial startup it idles rough drops down to 1000rpn then...

hey all! been having this overheat problem since almost couple months, so I stopped riding until I get this all figured out. so now I see it has a swollen radiator and bent fins on top mid part is ok and bottom swell also with bent fins, when it overheats like a 5 minute ride it squirts out...

I own a 2010 Renegade 800xxc Having a few problems it has 35 hours (520 kilometres) and it does not idle normally it either starts and stops strait away or the idle changes dramatically and eventually stalls, and If I go through water and stop for a while while cleaning my bike (with the...

Hey gang, Went out for a winter run today with my Can-Am 800 Outlander with Apache Tracks. About 30 minutes in, I noticed a burnt smell coming from the belt drive air intake and the cover was quite hot. I've never burned the belt and haven't changed it in a couple of years. Could the extra...

So I know this has maybe been talked about to Death but..... Seems to me that there still is not a good answer and still lots of questions. So im doing my own Temp testing. So i have jimmy Rigged a Temp Gauge into my Radiator, Im running tracks and Plowing, my Fan runs a bunch. Temp is showing...

I own a 2010 Outlander 650 xtp. I keep having overheating issues. it keeps poping the 20amp fan fuse and I can't figure out why. I've blown through all my spare fuses that where in the cover, and had to get more. I'm pretty sure it's only overheating because the fan isn't kicking on. But it...