Can-Am ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 18 Results
  1. Can-Am Outlander
    Does anyone have a link to a part number for the radiator relocation clamps that are provided with the can am outlander relocation clips. The shop I took mine too said they were to small (Broke one while installing it) and I really want to get the proper hardware installed.
  2. Can-Am DS
    Hey guys, new to the forum. Getting ready to pickup a showroom condition 2000 ds650 and was wondering if they still make parts for these things? I’ve tried google searching stuff like axle bearing carriers and come up with nothing. It doesn’t need anything.... Searching just in case type deal...
  3. Can-Am Service Manuals/Bulletins/Recalls / How To
    I have a 2002 Bombardier (Can AM) Traxter 500 XT. it has the electronic push button shift and automatic shifting. About a year ago it stooped shifting all together and is stuck in 4th gear. I was told that we needed to replace the Solenoid valve assembly part number 711256540 but the company...
  4. Can-Am DS
    I recently purchased a ds 650 that doesnt fire, was curious if anyone had a spare oem CDI box they would like to sell? Also in need of the oem exhaust that has the DS650 emblem on the side.
  5. Can-Am XMR
    Hey guys, I'm located in Calgary and just purchased a 2012 800 XMR for a steal of a deal (2000km ~$5500). I was wondering if you could give me any advice on mechanical quirks, things to look out for anything else that will help me out on the day to day stuff. I'm also looking for info on any...
  6. Can-Am Outlander
    G'day all. Have a 2006 Outlander that has timing chain issues it has done 3110 hours, and needs to be repaired which I will get done at the dealer. Planning to keep this machine going as a second machine and spare, but would like to buy another bike as well. I can get a good deal on a new 450...
  7. Can-Am DS
    hello all, I am slowly rebuilding my DS650, I need the rear fender supports, and heal gaurds. Please can anyone help? I cant ride it until then because the fenders flap and hit the tires. please help. thanks..... also are there any interchangeable ones too? :aniwheeler6:
  8. Can-Am Renegade
    I have a 2013 Renegade 500 and most of the stickers have been damaged by my aggressive power washing. I wondering where I can get replacement stickers for a good price (Can am wanted a ridiculous amount for them). I have leaned my lesson not to power wash around stickers. thanks
  9. Can-Am Outlander
    $300 shipped for pair -Basically new front axles from a 2012 XMR, replaced almost immediately with Gorilla Axles, less than 50 miles $20 shipped - Race Driven Rear Brake pads, again for 2012 XMR, should fit many other years and models check with Race Driven $10 + shipping - Factory Plastic...
  10. Can-Am 2011 Models
    Looking for help!! My 2011 XXC needs a new Pittman Arm and BRP stopped making them already. It should be a $30 part but there saying in need to buy the $800 power steering assembly just to get that one piece. I need a Generation 1 Pittman arm if anyone has one or the aftermarket equivelant.
  11. Can-Am Outlander
    I recently got a outlander 800 and was wondering if a can am maverick belt would fit on it? I also need a few parts.. A good crank.. and preferably a good set of high compression pistons. if anyone can help it would be much appreciated!
  12. Can-Am / BRP
    Anyone have a Rally 200 cylinder head they would be willing to sell? We have one with a broken valve that damaged the head/valve seat and I've been looking on eBay for 4+ months and not found one.
  13. Can-Am Outlander
    Does anyone know a website where i can get oem parts like a front diff fill plug $7.99 and cheap shipping? All the sites ive been on are charging like $15-$20 shipping which is outrageous for that small thing.
  14. Can-Am / BRP
    Hi everyone. Just picked up a 2002 Rally 200 in pieces and it looks like it broke a valve and we need a cylinder head, one exhaust valve, piston and some gaskets at the very least to get it back together. Trying to these parts used (not the gaskets, of course) and looking for someone who might...
  15. Can-Am Outlander
    HI guys Ok so i just got my atv back from the dealer after i hit a tree spent a pretty penny. But noe he tells me the radiator is swollen and wants 6-650 to change it. I was hoping to do this myself but really im not that mechanically inclined( youtube is my Friend) I wsa hoping to get some...
  16. BRP Traxter / Quest
    I have a 2004 Traxter XT, the engine and clutch are good. The frame is good and it has a winch. The seat body is good, but the vinyl is torn. Unfortunately, the MPEM (electronic module) fried. I cannot afford the part new and I have to sell it. What is a good price to ask for it? I am not...
  17. Can-Am Renegade
    I'm set on a 2011 renegade 800R and i plan on getting it in the upcoming weeks and I'm already searching for after market parts and accessories. I have a few questions with after market parts and I'm also looking for your opinions on certain manufacturers and products. Maybe even some...
1-17 of 18 Results