Can-Am ATV Forum banner
problem
1-20 of 23 Results
  1. Can-Am Outlander
    Good Evening, I have a 2016 Outlander 850 XMR It's having an issue where say the bike is in neutral. To get into reverse I have to go all the way down into park (so I can't even get to park). To get into high, I have to go all the way into low (so I can't get into low either). It just seems...
  2. Can-Am Defender
    Hi All, New to the forum and wanted to see if anyone else had this issue. I have a 2020 Defender limited with about 300 miles on it. Ever since ~100 miles in, I have been getting a PPS fault error at random times during casual riding around the neighborhood (all dirt\paved roads, no trails). I...
  3. BRP Traxter / Quest
    Hi, New to forum, nothing like a new "friend" that asks for help right-away! I have a 2006 John Deere Buck 500 EX, basically a rebadged Traxter 500 if I understand my history. Has the auto/manual shift tranny. The machine has been sitting for 3 years, probably has 50 miles total on it since...
  4. Can-Am Outlander
    Hello, Everyone I'm wondering if any of you can help me fix my machine which is a `09 500 Outlander max I've had it about 10 months now and it has seems to have developed a Starting issue that happens time to time the machine will fire up its electronic display ,and will prim it`s fuel pump...
  5. Can-Am Outlander
    I have a 2005 outlander 400, The left axle will not stop popping out of the inter joint. The groves in the inter joint are a little wear , but I don't see how that will be a problem. I don't know what going on and could use some help.. please....
  6. Can-Am XMR
    Hi, Anybody ran into this problem on an xmr getting an exhaust leaks when going into deep water enough to cover the entire exhaust. When i enter the water there is no abnormal noise and as soon i get out of water i can heard a very loud noise like if the header was broken. Removed the exhaust...
  7. Can-Am Outlander
    anyone else expierencing the front shocks blowing out on the new 2015 xmr 800 or am i just riding too hard? theses are not the air shocks for anyone wondering just the regular shocks wondering if it has anything to with all the added weight, with what look to be the same shocks as the stock...
  8. Can-Am Outlander
    Hello! Snow just arrived here in the western part of Norway and I was eager to do some plowing and having fun with my Can-Am, but I'm in a bit of a mess! For some time, it's happened from time to time that I have had to turn my key from ON and OFF again in order for it to actually start. Seeing...
  9. Can-Am Renegade
    Hi, I have a 2014 Renegade 800R and i did my first service today and i greased all of the grease fittings expect one, the U-joint near the gear box i just cannot fit my grease gun on the fitting... Does anyone have the same problem?
  10. Can-Am Outlander
    i was out riding today was going great i had just got down cruising down a dirt road at about 40mph then i stopped for a minute then started it back up was riding around a field pulled a small wheelie then road about 100 yards and it started smoking out of the exhaust burning oil. i shut it off...
  11. Can-Am Renegade
    Can somebody link me to a fuel pump that will fit in my 2011 renegade, dealer says fuel pump is good, but I've had it go bad before and know it's bad, it is bogging real bad, people say there are fuel pumps for like $40? Can't find any that low though, so a link will be helpful!
  12. Can-Am Renegade
    My brother just passed away suddenly and I am administering his estate. He owns a 2010 Renegade, and I cannot figure out how to start it. I keep getting an error message saying "K-Brakes". I have no clue what that is or how to rectify the problem. Can someone please let me know. Also, if...
  13. Can-Am Outlander
    Hey, I have a 2004 bombardier outlander 400 and yesterday I was riding it in some snow and parked it for the night... Although this morning I went out to ride it and the transmission lever was stuck on high. I can only move the lever to high and low gear. I cannot start it either because it has...
  14. Can-Am Outlander
    Hi, I just wanted to see if anyone has heard of or had this problem with their outlander 1000 before. Just to give you a fast rundown on the bike. I just bought it about a week ago it was used as a demo and only has 11 hours and about 100 miles on it. I'm getting ready to do a custom build with...
  15. Can-Am Renegade
    Well during this ride this weekend my renegade started making this weird noise that sounds like metal rubbing on metal, it is more noticeable in higher rpm's and also it seems to vibrate my floor boards a lot more! It sounds like it's coming from the clutch and I'm running a Dalton clutch kit so...
  16. Can-Am Renegade
    So I recently ordered some new 9005 hb3 bulbs that are 12v for my renegade, I was installing them today and it seems that they won't turn on?? They fit great and snap into place just like the OEM ones and I checked my uses, they weren't blown or anything, what is causing them not to turn on?
  17. Can-Am Renegade
    Just a curious question.. I've have had dielectric grease in my key and connections to prevent water from getting in there for most of the time I've had my Renegade, but I still have had to replace an entire ECU and 7 ignitions. Every time I get a "Bad Key" message, the next step is replacing...
  18. Can-Am Renegade
    So last trip I took, my front drive shaft started to come loose and I thought that was making this rattling sort of noise, nothing fell apart but when I got home I tightened it. I took it down the street and the same thing was happening, I checked the front diff, everything seemed to be fine and...
  19. Can-Am / BRP
    Ouch!!!!
  20. Members Rides / How To Videos
1-20 of 23 Results
Top