Can-Am ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 46 Results
  1. Can-Am Renegade
    Hello guys. (Renegade 1000r XXC 2016) I have a race in 2 days and my atv is full of problems, i need quite a bit of help so i dont blow the engine. So from what my mechanic told me, there is air in the coolant, which may result in water going in the engine and blowing it. Engine overheats, i got...
  2. Can-Am Renegade
    Hello all 👋 I have a 12 renegade 1000 xxc. I just had a engine rebuild with a new Franck shaft. After installing the engine everything seemed to be running fine just at a higher rpm than usual. Both the primary and secondary clutch spin from start in every gear. If I shift to reverse high or low...
  3. Can-Am Renegade
    Looking for some advice as to why both of my rear axle boots at the diff are hot and inflated/swollen. Just replaced the right axle yesterday due to breaking the previous one which was inflated as well. I’m worried about breaking this new one. Anyone have any idea what’s going on?
  4. Can-Am XMR
    Okay guys so I have a 2016 renegade 1000 xmr. Is it possible to use a front brake caliper for the rear? I have a bad rear brake caliper and I have an extra front caliper so I’m wondering if the front one will work. It looks like it would bolt up completely the same. Everything looks to be the...
  5. Can-Am XMR
    Hi everyone, this might seem stupid to some but I just want to simply get rid of issues and future problems. I keep having issues with my power steering and just don't really see the need on my 18 renegade xmr 1000. Is there a way to take out the power steering box and just put a regular...
  6. Can-Am Renegade
    can someone tell me if this is an xmr gearbox part number 420685807
  7. Can-Am Renegade
    Need help diagnosing low power on Can-Am Renegade. Bike is a 2017 Renegade 1000R, only has 64 hours on it. No engine performance upgrades with the exception of a dual empire exhaust. No tuners. Have a tuned CVTech primary and a clean stock secondary. Brand new belt, broken in. The performance...
  8. ATV Tires and Wheels
    Hello fellow riders, I’m looking for a set of stock bead lock rims that will fit a 2020 Renegade. I’m setting up a spare set for members of our group. We had an incident where a member tore a rear tire pretty good & his weekend was almost cut short. Don’t want to be 6 hours from home, money...
  9. Can-Am 2021 Models
    I have a 21’ renegade 1000 xxc bone stock, just hit 200 miles and am happy with the way it runs. Starting to think about modifications, I want to start with a power vision 3 and eventually get a slip-on. My question is, will the PV3 add power to the stock machine with stock exhaust? Does it make...
  10. Can-Am Renegade
    Hey guys! I’m hoping someone can help me out or point me in the right direction I have a 13 renegade 1k xxc it’s running like shit half power type thing sometimes then tuff to start up. Oil was low when I cheacked not empty but below the lines.... thinking she blew what are my options???? If...
  11. Can-Am Outlander
    I just picked up an HMF slip on for my bike and was wondering if a tune is gonna be required when I put it on? I know you need one for a full exhaust but wasn’t quite sure about a slip on! thanks everyone!
  12. Can-Am Renegade
    My guages stopped working last fall, I have been riding without untill now. I'm working on my nephews 2015 xxc and I decided to switch the guages. And my dead unit worked on his bike and his newer one worked on mine. I put mine back on my bike and still nothing.. what the heck would cause that?
  13. Can-Am Renegade
    Hello guys I wonder if those injectors in the photo are fit my renegade 1000 2015 ??
  14. Can-Am Renegade
    Hey there looking some other views/opinions... have a 2014 renegade 1000 bike was in -40+ for a couple days in the truck I noticed I had antifreeze everywhere got it home and coolant reservoir was empty and anyifreeze had blown all over the bike couldn’t tell where it was coming from so cleaned...
  15. Can-Am XMR
    I have a 2020 can am renegade xmr and I want to change the belt for a Can am Maverick belt. But I don’t know what belt it is. Can anyone tell me what’s the part number for the belt Thanks!
  16. Can-Am / BRP
    My canam renegade xmr 1000 every so often overheats for no problem. I tested the fan and it works. Tried switching the fuse out and it still didn’t work. Even tried disconnecting the temp sensor while the bike was running to see if that would make it turn on. Also didn’t work. Topped off coolant...
  17. Can-Am Renegade
    Hey guys new to the forum, looking for some help/opinions owned lots of bikes but just sold my gade and looking to get another have found a couple but they have big bore kits.... I’m looking for a bike to be as reliable as possible will a big bore be that or am I gonna be into issues Thanks in...
  18. Can-Am 2020 Models
    Hi everyone, I was out riding today and ended up hitting a tree on my 2020 can am renegade xxc 1000, long story short the underneath of the front right tire is what hit the tree, the bike spun around and landed upside down. The hit ended up snapping my front right shock off, bent the rear of the...
  19. Can-Am Renegade
    Hi, I bought this toy last month, I love it! 1st question: How's going with this ABS BTC version? It is better or worse than the ViscoLok version? Should I swich to ViscoLok? If yes, any costs? 2nd question: during first 3 weeks, the 4x4 sign on the dashboard was on he right side. Last...
1-19 of 46 Results
Top