Can-Am ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 23 Results
  1. Can-Am Outlander
    2018 Outlander 570 EFI Searched the forum and only found some older posts so wanted to start a new one with hopefully some new solutions! I have upgraded most of the components of my rear suspension: -CFAB Trailing Arms (Canam Outlander/Renegade Trailing Arms) Moose Utility Shocks (Moose...
  2. Please Introduce Yourself
    I am 60 yrs old from north central Oklahoma I am a long time side by side owner. i am on my 3rd SUV. I started with a Yamaha Rihno, Traded it for a can am HD10 and currently own a Defender Limited. I love my ride. I drive it everyday for work and fun.I chase Coyotes, hogs, upland birds and use...
  3. Can-Am Outlander
    I have a 2020 outlander 850xt with one inch spacers. I really need to increase the stiffness of my shocks so obviously I want to upgrade. I don't ever go on joy rides with my atv. I do not go through any bad mud for the most part. It is simply used for hunting/work. I frequently carry heavy...
  4. Suspension
    Am I blind or is there no adjustment to the stock renegade 570 shocks other than adjusting the springs? They are fine for trail riding, but once you hit chop, washboard, or whoops they suck. Maybe it is rider error or not having enough power to keep the front end up from dipping down in the...
  5. Can-Am Renegade
    Hi. My shocks are shot, basically. I have a 2012 Renegade. I found a parting out 2010 Renegade xxc. Would those shocks fit? I know the frame changed in-between those years.
  6. Can-Am Outlander
    Wondering if anyone has attempted to put the shocks from a 2020 in a 2014 to replace the air shocks. My bike has a 6” satv lift and I will be double riding quite often with it and noticed it bottoms out constantly when running rough dirt roads due to the automatic softening at higher speeds...
  7. Can-Am Outlander
    I was looking at getting a brand new 2021 out-lander xt and I'm undecided on whether or not to get the shock upgrade because there are two options the 1550 dollar shocks and the 2500 dollar shock and I was wondering are they worth the money and how do they perform. I do ride quite aggressively I...
  8. Can-Am Outlander
    I'm trying to turn the adjustment height on the preload for my low end/factory shocks but I cannot for the life of me turn them. I've tried putting some penetrating lubricant on the area and jacking up the quad. Is this a common thing? How do other people get them to unseize? They are set to...
  9. Can-Am Renegade
    Hey everyone, so long story short, Ive own a honda TRX400x (the newer version of the old 400ex) and cant stand it anymore. I have had issue after issue with it and no end in sight even with great maintenance. If it had all kinds of issues but performed great I wouldnt be that mad, but the engine...
  10. Can-Am Outlander
    Hey everyone, I recently purchased this quad and I am getting into replacing the old worn out parts. So far I have changed all the fluids and put some 27" Bear Claw HTRs on it with 1" spacers. The shocks are the next part that will need to be replaced. I am not looking into lifting it...
  11. Can-Am Outlander
    I want to put Outlander 1000 XT max shocks by elka on my XMR and go to a 28in tire. Has anyone tried this as the xmr shocks are mechanically limited which makes for horrible trail riding?
  12. Suspension
    I purchased a used 2008 Outlander 400 for my wife last year. I noticed the suspension was pretty soft and sags significantly in the rear. I tried to adjust the rear shocks and couldn't get it to budge, even with the rear jacked off the ground. I wanted to upgrade the shocks on my 2007...
  13. Suspension
    I have a 2013 outlander 650 xt and the front shocks are blown out. Not looking to spend to much. I'm looking for a decent affordable replacement or am I better off going stock? Any help is appreciated.
  14. Suspension
    So what's the word on the best shock (performance, reliability, serviceability) for the buck?? ELKA FOX MOTOSPORT RACE TECK CUSTOM AXXIS OHLINS WORKS ANY OTHERS?! I'm not professionally racing, just going as fast as possible in the mountains of Beautiful Alberta Canada. Who holds up to mud...
  15. Can-Am Renegade
    I have an unusual problem I think. I have removed the lower a arm, both ball joints, the tie rod and one bolt (the after one) from the top a arm. I have the nut off the forward bolt but that bolt will not come out even though I can spin it around with a wrench. Anybody out there have any idea...
  16. Suspension
    Whats up Guys, I need Help!!! I let a VERY Fat cousin of mine ride my quad and he actually bottomed it out. :clapsmilie: I know... Crazy!!! Anyways the cable that connects to the Rear shock rubbed on the chain and wore a hole through it. Couple questions... What is in the tank air or some type...
  17. Suspension
    Just curious to see if anybody has tried both and if there is a significant difference between the Fox Podiums and the Ruberdown Custom Spacers. I am sure the fox shocks would be better, but how much? I am trying to justify the cost of the shocks. I have the spacers now and if the ride is not...
  18. Can-Am DS
    Like the title says, I need upper and lower left side a-arms for 2000 DS650. Let me know what you have.
  19. Members Rides
    I have been battling this whole suspension thing way to long now. I know that not everyone rides the same or built the same, but I am wondering how you guys have adjusted the setting your shocks. I primarily do hard core trail riding at about 25-75mph... WOT. I'm not looking for something super...
  20. Suspension
    Hi there from Scotland Having major issues with my suspension. Front suspension keeps banging as it tops out and rear suspension is too soft and keeps grounding especially when towing or when rear rack is carrying any weight. Was wondering if the Outlander 500 shocks and springs are heavier...
1-20 of 23 Results
Top