Can-Am ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 23 Results
  1. Can-Am Defender
    Hi, the engine of my traxter starts and dies after 2 seconds (cold start). When i start the engine again it runs without a problem and when the engine is warmed up it starts perfect. The Batterie is new. Fuel is good. Park plugs are new. Sometimes the engine light is on with error code P0106 i...
  2. BRP Traxter / Quest
    I'm restoring a 04 Traxter XL 500, the fuel lines (internal and external) are dry rotten. I need to know the routing and end points of the vent line(s) once they leave the tank. The parts diagram isn't clear and depicts as if they just end in space after a one "T" connector and one "check...
  3. Can-Am 2018 Models
    Hi all . I have a 2018 can am traxter HD8 ( defender in the US) that i bought second hand back in september 2020 with 600 miles on the clock . Its been running well except that when i turn the heater on it uses up the coolant. Is this normal? It doesnt use the coolant up at all when the...
  4. Can-Am / BRP
    I have had my Traxter for 10+ years. It was mechanically sound (I even changed the sprague clutch withe help of this forum's members). I guess the decades of plowing and riding took a toll on the front wheel hub bearings. I purchased OEM replacements and installed only to notice the same...
  5. BRP Traxter / Quest
    Here’s a thread with the solution to your Traxter MPEM (multi-purpose electronic module/ECU) issues: This should apply to 2001-2005 Traxter XT500s, possibly more. I was having issues with my 2001 Traxter. When the battery was hooked up, it was flashing all of the dash lights. For whatever...
  6. ATV Tracks
    Thinking about buying a 650 Quest. Anybody running Camoplast Tatou 4S tracks on one? How do you like it? Adequate power? Please give me your likes / dislikes. Currently have them on a 500 Traxter. Looking at the Camoplast web site, I can buy a conversion kit to transfer the tracks to the...
  7. BRP Traxter / Quest
    Hello everyone. I've done a lot of searching. But can't find the exact issues I'm having. So here comes the ramble. I'm no mechanic. But I have wrenches and stuff for pretend. I bought this machine, owner said it lost spark, they couldn't figure it out so they decided to move on. I brought it...
  8. Please Introduce Yourself
    Good Afternoon, I've learned this machine is actually a 2005 Can-Am Traxter 500 CVT with green plastic anyway it currently wont start , I've traced everything out (all permissives made) and deduced there's no output from the Electronic Module to the starter solenoid, I think the Electronic...
  9. Bombardier - JohnDeere TrailBuck - Traxter XL < before>

    Day 1: Patient admitted D.O.A. with 11 frame fractures, missing parts, and very dirty. Power-washed and sent to extensive care unit. More info & photos to follow. Look closely at frame breaks.
  10. BRP Traxter / Quest
    I took the stator cover off and replaced the stator on my 2001 XT. In process I bent the mechanism which ratchets the shift pawl. Repaired that, but in meantime e it seems that the shifter is in one gear and wont index to others. Is that normal and will restore when oil pressure is restored...
  11. Please Introduce Yourself
    Hello all, Eric here from central Texas, I run a family sea-doo dealership here in Kingsland. We use to be a can-am dealer back in the Traxter days. Still run a 2000 Traxter daily to pull boats and skis to the boat ramp. Other rigs include an 07 Outlander 500, and 16 Commander Max LTD.
  12. BRP Traxter / Quest
    I have a 2005 Traxter 650, and for the first time ever, I am having starting problems, and was wondering where to start trouble shooting. Lights work (on key switch), battery is fully charged and functional, battery terminals are clean and corrosion free, winch works, and all other electrical...
  13. BRP Traxter / Quest
    I am trying to figure out how to set up an LED light bar on my 2001 Traxter and activate it when I press the hi-intensity switch on the handlebar. Since the headlamps on my unit become brighter simply by sending higher current to the headlamps, I don't think it as simple as tying into the wires...
  14. BRP Traxter / Quest
    Hello, I just wanna see who has the highest mileage rig. My '01 Traxter has 7,998 miles with same engine and trans. What's yours? Thanks
  15. BRP Traxter / Quest
    I have a 2001 Traxter 500 and I am having troubles starting the bike . I tried jumpering it from the starter and it will start that way but can not start the bike with the electric start . Indicator light keeps reading that the bike is in reverse - neutral I can manually shift through the gears...
  16. BRP Traxter / Quest
    I was wondering if anyone out there has had this issue I’m about to mention below with their 2000 Bomby Traxter or other Cam Am bike. A few weeks ago while plowing driveways my bike stalled a couple times but a second before doing so a short rattle (not a grind) could be heard from front portion...
  17. BRP Traxter / Quest
    I was wondering if anyone out there has had this issue I’m about to mention below with their 2000 Bomby Traxter or other Cam Am bike. A few weeks ago while plowing driveways my bike stalled a couple times but a second before doing so a short rattle (not a grind) could be heard from front portion...
  18. BRP Traxter / Quest
    I was driving my 500 traxter , it started making noises so i shut it off went to go and start the machine again . Noticed that it sounded like it had no compression so I pulled the plugs and determined that it has compression . Then took the cap off of the motor where u put the oil in noticed...
  19. Can-Am / BRP
    Found in my garage.... compliments of my cheating ex. Can someone help me figure out what this is? It says Bombardier. The left side has these numbers: 105100028-F. I cannot figure out the part number on the left. I want to sell it but need to know what it goes on. It appears to be Traxter rear...
  20. BRP Traxter / Quest
    I have a 2004 Traxter XT, the engine and clutch are good. The frame is good and it has a winch. The seat body is good, but the vinyl is torn. Unfortunately, the MPEM (electronic module) fried. I cannot afford the part new and I have to sell it. What is a good price to ask for it? I am not...
1-20 of 23 Results
Top