Search Results for ‘wiring’

Hello everyone. I searched the internet for days trying to find a pass through for wiring from the front end to the inside of the cab before I started installing my Turn signal and horn kit. I couldn’t find anything. Finally I just decided to start and see what I could do. I found one spot under...

In the process of rebuilding a pull behind trailer for my brothers Defender, the trailer will have all L.E.D. Lights. My question is, is there a aftermarket “plug and play “ system that can be installed on the utv. The dealership doesn’t won’t deal with it, so my guess can-am doesn’t make a...

Hi All, New to the forum and wanted to see if anyone else had this issue. I have a 2020 Defender limited with about 300 miles on it. Ever since ~100 miles in, I have been getting a PPS fault error at random times during casual riding around the neighborhood (all dirt\paved roads, no trails). I...

Hello, I have a can am defender hd8 base and hooking up a winch(canam 4500). The wire harness from the rocker switch needs to be connected to the bullet connectors under dash(per instructions) I can’t figure out the color code. Anyone have suggestions?

Does anyone know if there is an accessory bus on the 2019 Mav Sport Dps 1000r for running power for accessory adds without going to the fuse box? If so, where is it located?

Hello guys, I used the search engine and looked at other threads - to no avail, so I'm creating a new one: I recently got a new Outlander. I like riding trails, and where I am, we are allowed to have a trailer on the ATV as long as it has a brake light (tail light). It should function the...

I have a 2000 Traxter 500 that I bought and have been working on. It currently does not run but I am trying to solve that as I have several issues. But the one that I would like some input on is the ignition wiring. I bought a new ignition switch and hooked it up. It did not work so I pulled all...

I'm about to do the override switch for my fan on my renegade, but can anybody tell me what wires it is? I've heard multiple wire it's supposed to be, just want to make sure before I splice into things

I just bought a 2007 can-am renegade 800and was wondering if you guys could help. When I bought it I checked if the lights worked,they did only on low and they are very very dim. The problem is that the guy that I bought it from said that the bulb on high beams kept going bad so he didn't...

I have just installed a flex plow on my quad and cannot get the proximity switch to work with wireless remote connected to the winch. works fine if i disconnect the green and black wires from the contractor. dunno if I am wiring it wrong or if I need to make up some extra harnesses or what...

Wanted to replace the reflectors on the back of my new outlander and i did some looking on the web. Found these led lights that fit perfectly in the exsisting hole. Only mod work i needed was to hole saw out the center for the base of the light to slide through. I installed the switch on the...

so i went to go out for a ride yesterday but when i started my bike it ran for 10 seconds and then shut down now i have no power and when i turn the key on my main relay fuse vibrates and hums i tried swaping it out for a new one but no such luck any help would be greatly appreciated

Need some help folks....please. Can't get solenoid to activate and create current to the starter. Quick scenario (after re-read not so quck) is I purchased a used 06 Outlander 400 XT that had some issues. After buying it I noticed some mice got into the wiring and chewed a few up under the...