Can-Am ATV Forum banner
xmr 1000
1-19 of 26 Results
  1. Please Introduce Yourself
    Bought a 2021Can-Am Defender HD10 Max XMR. First Can Am. Old buggy was a Polaris Ranger High Lifter 2-door. I have upgraded to X3 Springs and Super ATV front A-Arms and 35s on 20s.
  2. Can-Am Maverick
    I own a 2018 Maverick XMR. It has a small lift and 32" Carnivores on it. When in forward or reverse and turning, there is a popping noise from the rear-end. Almost as if something in binding. Wanted to see if I could get some thoughts. I should note we pulled the rear diff and opened it up...
  3. Can-Am Outlander
    With a bit of bit of thinking and mocking up old racks from the local dump, I mounted a Yamaha Grizzly 700 rear rack with a cross member from a Honda TRX 350 onto the front end of my Can Am Outlander XMR 1000R. I've also added Honda TRX 300 fender extensions to the front and rear. All in all, I...
  4. Can-Am Outlander
    Alright guys I have a 2021 Can-am Outlander XMR1000R turned it over on its right side (the side snorkel is on ) in a water wheelie hole it drowned itself out so it wouldn’t crank , brought it home , took plastics off , spark plugs out , drained airbox , new air filter , two oil changes back to...
  5. Can-Am XMR
    Hi everyone, I bought a 2014 Outlander 1000. It’s lifted 6” and has 32” outback’s with a dalton clutch kit. The reason I’m here is asking about performance. It’ll wind out to 7500rpm and I can get about 105-110km/h out of it. Not that I’m disappointed but it just doesn’t seem to have the grunt...
  6. Can-Am Outlander
    I’m buying a new battery and looking to go lithium. Anyone have recommendations for my 2016 Outlander 1000 XMR? I run Ionic lithium batteries in my boat, which I love for the bluetooth app feature. But would like to know what others are running and if any fit like the stock battery.
  7. Can-Am XMR
    Posting for a fellow Gade pilot. Brand new XMR 1000 Gade with 200 miles. After a ride he was complaining of the machine not being stable. He was coming off an older XT 1000. He is a great rider & was always on my bumper when the dust cleared, so this is not an issue of a novice rider. We...
  8. Can-Am Renegade
    I have a 2016 can am renegade 1000 xmr the dash cluster will turn on show my name show the DPS settings show the gas level and 4x4 but will not display speed rpm or any of the other information like engine hours I have cleaned the speed sensor checked fuses and the connection 2 the screen can't...
  9. Can-Am XMR
    2014 outlander xmr 1000 putting it in reverse and hitting the throttle the bike revs up and it sounds like the intake is blowing or sucking air along with sputtering causing it not to shift out of reverse after hitting the throttle while forcing the shifter to high/ low it will finally go in to...
  10. Can-Am Outlander
    I have a 2012 outlander 1000 xt that I got in bad shape. It had a wild bore rad relocate with no bumper at all. Was wondering if it were possible to get all XMR radiator and bumper to fit on my bike. Thanks in advance.
  11. Dyno Reports | Tuning Center
    Just bought a powervision 3 for the 2019 xmr 1000. Looking for some advice on tuning. I've got 2" air intake (snorkel kit) hmf slipon performance exaust, and a dalton clutch kit in it anyone know where I can get tune downloads to throw in it out side the ones that come with it or what to change...
  12. Can-Am XMR
    2020 Renegade Xmr, I've noticed that my bike rides kind of rough and doesn't seem as plush as the other bikes with the older style coilovers like on the 850 xmrs. My bike has the new style piggybacks with the 3 stage adjustment knob. I have my bike dialed all the way down on 1 and its still...
  13. Can-Am XMR
    I have a 2020 Renegade 1000 xmr. I was riding like I do normally and came across a basically water hole that I had been through a few times before and decided to go through again. When I did the water level went barely above the headlights but nowhere near the snorkel. A check engine light came...
  14. Can-Am XMR
    Was riding my 2016 Outlander xmr1000 this past Sunday, while accelerating from 0, and when in reverse, my outty is making a bang sound that seems to be coming from my front differential or driveshaft. Got under it and found 2 bolts that hold the diff in place were super loose, tightened them...
  15. Can-Am Renegade
    Alright so I am new to the forum and I need some help, I have a 2016 renegade xmr 1000 with a 6” superatv lift on 34” assassinators, i heard rhinos aren’t good axles but it’s what comes with the lift so I figured I’d try them, I just got the bike together and boom third ride out, torn axle boot...
  16. Can-Am XMR
    Good Evening Everyone, I have a 2014 Can-Am Outty 1000XMR. On my last ride, I shattered my belt. This weekend I replaced the stock belt with a new one. During the process I had to take the primary and secondary clutch off, to get old belt pieces off. Today, I went for a test ride and noticed...
  17. Can-Am Outlander
    I have a 2013 OUTLANDER XMR 1000 and I recently found that BOTH my calipers are leaking fluid .... Has anyone seen recalls or had issues with these?
  18. Please Introduce Yourself
    Hey guys(and gals). I'm new to this forum.... and forums in general. Looking at buying a 15 xmr 1000. I grew up on Honda's so its a big change for me. Have to say i'm excited for the change. Pretty well set on the xmr. Just wondering what guys are running for exhaust. Dealer tell me the two...
1-19 of 26 Results
Top