Can-Am ATV Forum banner

1 - 20 of 39 Posts

·
Registered
Joined
·
1,044 Posts
Discussion Starter #1
Figured I would share my build I started in the fall of 2014, as any project it will never be complete.
I purchased a bone stock used 2012 outlander 800xt with just over 1000km on the speedo. ImageUploadedByTapatalk1428448868.189254.jpg ImageUploadedByTapatalk1428448892.497030.jpg

First mod before riding was a SPI slip-on pipe, excellent slip-on and very pleased with it, looks great and sounds awesome.
ImageUploadedByTapatalk1428448956.442696.jpg

First mods was to make it look like a 800xmr with the brp rad relocate and snorkel kit, also at the same time installing fox podium XXC shocks, highlifter MGC a-arms and extended trailing arms. Best way getting to know a new machine is taking it all apart :) ImageUploadedByTapatalk1428449016.774409.jpg ImageUploadedByTapatalk1428449055.209207.jpg
 

·
Registered
Joined
·
1,044 Posts
Discussion Starter #2
Ended up installing my rims and tires off my renegade since they where bigger then the stockers ImageUploadedByTapatalk1428450461.004053.jpg
But the 27" zillas where too small so ordered a set of STI rims and 29.5 terminators and brp mid guard kit ImageUploadedByTapatalk1428450556.811288.jpg
Changed out the brp rad relocate guard and added a custom cut punisher one ImageUploadedByTapatalk1428450668.104924.jpg
Installed a set of rox risers with the XTP 1-1/8" bars, brp heated grip/thumb warmer kit ImageUploadedByTapatalk1428450727.561632.jpg
Added a 3/16" plate on top of the steering stem since the stock stem plate will fatigue and crack due to the extra leverage of the rox risers ImageUploadedByTapatalk1428450872.697900.jpg
 

·
Registered
Joined
·
1,044 Posts
Discussion Starter #3
XTP gauge replaced the blah XT gauge and added the Dynojet POD-300 gauge ImageUploadedByTapatalk1428450997.683889.jpg
Some little custom billet gauge accent ImageUploadedByTapatalk1428451097.301636.jpg
Random riding pic :) ImageUploadedByTapatalk1428451214.139909.jpg
Swapped out the SPI for the BigGun EXO ImageUploadedByTapatalk1428451262.981155.jpg
Side pic of the biggun exhaust with tires and rims ImageUploadedByTapatalk1428451333.279756.jpg
 

·
Registered
Joined
·
1,044 Posts
Discussion Starter #5
Ended up getting another set of tires and rims since the terminators are a heavy tire and I'm a performance orientated person and I didn't like power robbing tires, ended up going with the grey STI beadlock rims and 30" zillas, near half the weight of the other combo ImageUploadedByTapatalk1428451418.740832.jpg ImageUploadedByTapatalk1428451433.613507.jpg ImageUploadedByTapatalk1428451449.804949.jpg
STM rage6 primary and STM secondary since I like bling ImageUploadedByTapatalk1428451594.808687.jpg
Custom rear badge and Carbon fiber decal kit ImageUploadedByTapatalk1428451638.694134.jpg
 

·
Registered
Joined
·
1,044 Posts
Discussion Starter #6
Yet another exhaust change from the biggun slipon to a full HMF performance series system, again switched as I'm looking for power gains :) ImageUploadedByTapatalk1428451708.812235.jpg ImageUploadedByTapatalk1428451722.687002.jpg ImageUploadedByTapatalk1428451738.711284.jpg
I'm a sucker for sales and bought a set of elka shocks to replace the fox shocks and the color match was a plus ImageUploadedByTapatalk1428451808.075802.jpg ImageUploadedByTapatalk1428451820.833166.jpg
 

·
Registered
Joined
·
1,044 Posts
Discussion Starter #7
Decided the 800 power plant wasn't enough, get-torqed built 940 with maverick heads was the new power plant ImageUploadedByTapatalk1428451900.721884.jpg ImageUploadedByTapatalk1428451919.114531.jpg ImageUploadedByTapatalk1428451942.510091.jpg ImageUploadedByTapatalk1428451983.761181.jpg ImageUploadedByTapatalk1428452002.653944.jpg
 

·
Registered
Joined
·
1,044 Posts
Discussion Starter #8
Last ride with the stock power plant and new shocks ImageUploadedByTapatalk1428452101.524676.jpg
Out with the old ImageUploadedByTapatalk1428452219.977436.jpg
51mm get-torqed throttle body vs the stock throttle body ImageUploadedByTapatalk1428452248.273658.jpg
Mudworx air filter cover for a true sealed airbox ImageUploadedByTapatalk1428452290.129004.jpg
Representing the new power plant, no sleeper mod lol ImageUploadedByTapatalk1428452330.829329.jpg
 

·
Registered
Joined
·
201 Posts
Dude this is a sick a** build man.
 
  • Like
Reactions: MGRAM

·
Registered
Joined
·
436 Posts
Holy crap dude that thing is sweet nice build man money was no object on this one wow !!
 
  • Like
Reactions: MGRAM

·
Registered
Joined
·
1,044 Posts
Discussion Starter #13
Oh there was a budget aka credit limit lol
It's an expensive hobby and I like it :)
 

·
Registered
Joined
·
1,044 Posts
Discussion Starter #16
Wow, very nice! What are you gonna do with those fox shocks? :pi_sunglasses:

Probably end up selling them, fresh service with new seals and no km on them since, new springs, spring lift ImageUploadedByTapatalk1428506432.029416.jpg

Decided the 800 power plant wasn't enough, get-torqed built 940 with maverick heads was the new power plant View attachment 27128 View attachment 27129 View attachment 27130 View attachment 27131 View attachment 27132


How much did that run you?

BBK was $2200cdn, already had the maverick heads
 

·
Registered
Joined
·
436 Posts
How much for those shocks ? And I get dibs
 
1 - 20 of 39 Posts
Top