Can-Am ATV Forum banner

2014 xmr spring spacers

3052 Views 6 Replies 3 Participants Last post by  XMRPirate
So ive looked and looked and cant find how to install rubberdown spring spacers for the air shocks. I used a spring compressor and either im dumber than i thought or theres no way to take the bottom or top cup off the spring to install the spacer. Rubberdown hasnt responded to my emails and im trying to install tomorrow. The website doesnt have instructions for the xmr spacer install.Any help is greatly appreciated
Status
Not open for further replies.
1 - 7 of 7 Posts
10
Compress spring, Gently knock "shock ring" upwards to reveal snap ring, remove snap ring, remove bottom bolt and then remove "Shock ring" & Snap ring, slide on spacer. Re-install everything in reverse --- TAKE YOUR TIME...Enjoy.









Attachments

See less See more
My 14 xmr doesn't have any snap ring on top or bottom. I will try and take a picture
the 2013 and 2014 XMR 1000's have the same shocks.

elvis650 those pics are better than the ones I have, thanks for posting them.
the 2013 and 2014 XMR 1000's have the same shocks.

elvis650 those pics are better than the ones I have, thanks for posting them.
No problem. Feel free to use them.
The Clamshell Strut Compressor makes the install easy.
Only had to remove the bottom bolt.

Thanks for making such a great product.
  • Like
Reactions: 1
2
As you can see my 14 xmr 1000 shocks has no reraining clip.

Attachments

See less See more
nevermind i didnt know the clip was under the shock ring. i thought it had to be between the shockring and shock mount. Thanks for your help elvis ill try it again.
1 - 7 of 7 Posts
Status
Not open for further replies.
Top