Can-Am ATV Forum banner

2016 outlander 450 display issue..help!

3K views 2 replies 2 participants last post by  Daaedreamer 
#1 ·
Hey guys having an odd issue with a 2016 outlander 450 I picked up..
The display seems to be working but displays a maintenance message on key on, think its an oil change due thing, and then all I can get is "TH 0H00" and "EH45 1H09" when pressing the dash button. Gear selection display works, fuel reads as empty and fuel light is on...
I'm not sure where to begin any advice would be amazing!
 
#2 ·
Welcome to the site

I mean, that sounds like it's working correctly, to me. Maintenance message is just an automatic pop-up every 50 hrs or so, (or was it 100 :unsure: ) does nothing for or to the bike otherwise. There's a procedure for you to clear it, but it's a particular dance you have to get right, can be frustrating.

(T)rip hours, and
(E)ngine hours are what you're seeing otherwise. Bike's got 451hrs 9 minutes run-time on it, looks like.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top