30 inch on 2020 Outlander
1 - 3 of 3 Posts
I have factory ITP Cryptids on my 2020 Outlander 1000r Max XMR that are 30 inch though with a measuring tape are actually 29.5 inches. My machine is 2 inches wider than older models so the front tires do not hit anything when doing a sharp turn. Yours should be the same since it is a 2020 as well. Maybe someone else can chime in here that has done it?
Just a thought in passing- that's a lot of tire for that motor- you might discover a need to deal with clutches, running that big a tire on "just" a 650.
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Front tires
ATV Tires and WheelsHello, I have Sunf rear 26x10-12 and 26x8-12 front tires are new and I noticed that the front tires are a little lower than the rear by about 2cm or 0.7inch, the pressure is the same for all tires. I'm confused, I think the tires should be the same height ...- 4
- 172
-
Tires
ATV Tires and WheelsI have a 2005 Outlander MAX 400 4X4 and I need to replace all 4 tires. What are you guys running? The stock Carlisles have been good to me but wondering if there is a better alternative. Lower price is always good, too. Thanks!- 6
- 184
-
Running rough
ATV Tires and WheelsI have a john deere 650 trailbuck i use to get around my property due to arthritis. I started having a problem with it running real rough,i changed the sparkplug first cause it was so black i figured it was fouled up? Then i took carb off to see if it needed cleaned and found one of the jets had...- 0
- 353
-
Outlander 650 wheels
ATV Tires and WheelsDoes any body know the weight limit on a outlander 650 wheel , looked on my trail wheels it is stamped on the wheel around 247 kg max No stamp on the outlander wheel- 0
- 157
-
Front end alignment procedure
ATV Tires and WheelsI was just looking in the service manual and it indicates to perform a front end wheel alignment with the ATV elevated off the floor with the suspension fully extended. I find this odd. How is everyone doing theirs? Thanks in advance. Jay.- 1
- 217
Join now to ask and comment!