Check the fan first if the coolant level is correct .
You can check by disconnecting the temp sensor on the rear jug . Fan should come on while bike is running regardless of temperature when it's un-plugged .

 

Check the fan first if the coolant level is correct .
You can check by disconnecting the temp sensor on the rear jug . Fan should come on while bike is running regardless of temperature when it's un-plugged .

hi mate thanks for the reply, where’s the rear jug ?
I was just going to test the ports that connect the bike to the fan with a volt meter.

 

Make sure you wash the mud and dirt out of the fins. If plugged air won’t flow through for cooling

 

Hi mate thanks for replying, can I just jet wash it ? And if so do I need to take it of the bike or leave it on, sorry for all the questions I am brand new to can-am world, a rad on a angle doesn’t seem right to me surely it should be vertical 🤦🏼‍♂️

 

For sure really spray off both sides of radiator. You'll be surprised at all the crap that builds up on them. Also like stated above run the machine then let it idle to see if fan runs