[md_can-am]

I am trying to remove my front differential and am struggling to get the vent hose off. I can't find a video where they show it they always skip that part. I think there is a common trick I just don't know. Any help would be appreciated.

 

[EbenezerScrooge]

I am trying to remove my front differential and am struggling to get the vent hose off. I can't find a video where they show it they always skip that part. I think there is a common trick I just don't know. Any help would be appreciated.

Its just a hose over a barb fitting.. yank on it or cut it off and replace with a bellow. Thank me later.

 

[Synthetic]

When you pull, if the hose stretch it only grabs harder😁
Pry or cut.

 

[Dallasguy3583]

I am trying to remove my front differential and am struggling to get the vent hose off. I can't find a video where they show it they always skip that part. I think there is a common trick I just don't know. Any help would be appreciated.

I usually huse a little heat. Like a little torch just dont get to close. Same thing with putting it on

 

[10mm_]

Grab the hose at the barb fitting with pliers and rotate it, just get it to spin back and forth a little. Then put a flat screwdriver under the edge of the hose and twist to pry while you pull it off.

Usually if you don't get them to spin first they won't budge, like a radiator hose.