Can-Am ATV Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
my 2010 outlander 650max xt will not start but you can hear the sound of It engaging or whatever the starting sound would be but then the speedometer won't work you can't start it and none of the electronics work like the winch I was wondering if any one knew what problem it could be ?
 

·
Registered
Joined
·
75 Posts
Check the basics. Battery cables, clean and tight, battery in good shape, fully charged.
 

·
Registered
Joined
·
1,179 Posts
Check your kill switch. Sometimes the contacts need cleaning. Check that your key is in the right way. It makes a difference. Also check your key switch. Turn your key and kill switch on and push start button. If no start then, while holding the start button in, slowly rotate the key. Have to do that to mine sometimes. I have a new switch but haven't had time to install it yet. But as stated above, battery and battery connections first.
 

·
Registered
Joined
·
1,179 Posts
And so you know, the first sound your going to hear is the fuel pump priming. Always let that run until it stops. Only takes a couple of seconds. If you don't, you'll be replacing the fuel pump at some point.
 

·
Registered
Joined
·
4 Posts
Discussion Starter #5
Thanks guys I took it apart last night tho and it was one of the cables going to the fuse box all I had to do was move it and spray it with contact cleaner but thanks for the ideas
 
1 - 5 of 5 Posts
Top