Hey people. My name is Terry and I drive a 2012 Commander 1000 side by side. I just started to have this problem. Right after the machine starts, the alternator light comes on for a brief second, then goes out. When I turn my key back for the lights to come on. They don't and my alternator light comes back on and I get the message, check engine. The only thing that I have done so far was check the battery. It's fine. I was wondering if there is any modules that i should be looking for or any suggestions before I rip the hell out of it. Any input would be appreciated. Thanks.
TerryCanAm
- Status
You should be able to pull your P-codes with the key on, but engine not running, by scrolling to trip hour on your screen, then hold the button down and flash your lights (high to low) 3 times and a message should scroll across the screen with a P-code or "No Active P codes". These codes may tell you what is wrong. This procedure works on my Outlander 1000, hopefully it will work on your commander 1000. Give it several tries, the 1st time I tried it, it took me several attempts before I was successful.
- Status
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
