Can-Am ATV Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter · #1 ·
Anyone know how to check for codes without a buds... racing this weekend, belt smelt hot, coolant temps good. Running like a champ but got the damn limp home code while climbing a sand dune
Font Terrestrial plant Screenshot Number Document
 

·
Administrator
Joined
·
10,646 Posts
Try this.


  • 1. turn key to lights on position
  • 2. use mode button and scroll to engine hour (EH) on gauge
  • 3. press and HOLD the mode button while quickly toggling between high and low beam ( min 3 toggles in 2 seconds)
  • 4. If there is any P-CODES they will be displayed
 

·
Registered
Joined
·
21 Posts
Discussion Starter · #3 ·
Try this.


  • 1. turn key to lights on position
  • 2. use mode button and scroll to engine hour (EH) on gauge
  • 3. press and HOLD the mode button while quickly toggling between high and low beam ( min 3 toggles in 2 seconds)
  • 4. If there is any P-CODES they will be displayed
Thank you very much, I will try this tomorrow
 
1 - 3 of 3 Posts
Top