Either need a new belt or need to go through the clutches.

 

I agree need to go threw the clutches, sounds like it could be roller in secondary clutch

 

Thank youj

 

going through the clutches can I do myself or does the dealer need to do it?

 

You can buy whole clutch tool set up from hunterworks website

There are YouTube videos on it , it’s not hard , plus will probably save you time and money doing it yourself

 

If you have some mechanical knowledge, and the proper tools, its not a hard job.

Id def look into the secondary rollers, as ga4003 stated.

 

The 3 roller secondary you have is much harder to work on vs the old two roller but you can do it. Just start with making sure you have no broken rollers and see what the belt looks like.

 

Thank you