Can-Am ATV Forum banner

question on snorkeling outlander 1000

892 Views 5 Replies 3 Participants Last post by  Factoryrat
I plan on snorkeling my 2012 outlande 1000 soon. I've done many bikes before but first time owning a canam. Any help is appreciated!!

I'm guessing the front/rear diff vents should already be ran up to the pod. Is there anything else I need to run up??
I seen there is a hole in airbox for draining which I plan on siliconing. I read somewhere that the cvt exhaust will have to be 1.5"?
Status
Not open for further replies.
1 - 6 of 6 Posts
Here's a great write up on snorkelling an Outty.
http://www.mudinmyblood.net/forum/21-can-am-brp/23782-outlander-g2-xt-snorkel.html


Sent from my Nokia 6110
would there be anything different for the MAX machines when referencing this write up?
So did I miss something in that write up or does the bike in that write up not have this rubber air intake ?

Attachments

See less See more
The stock rubber intake was trimmed further back and pic added to make a stack.


Sent from my Nokia 6110
1 - 6 of 6 Posts
Status
Not open for further replies.
Top