Can-Am ATV Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
60 Posts
Discussion Starter #1
Ho,

I would like to know how did you manage to remove front diff seal ? I removed front propeller shaft and sleeve. There's a pinion on the center of the seal that make it difficult to remove it by prying, it seems to be stuck, do you have any tips / trick ?

Thanks!
 

·
Registered
Joined
·
7 Posts
I used a tip I found here. Take a small screw and screw into the seal. Then use pliers to remove it. Leave a little of the screw out so you can get it.
 

·
Registered
Joined
·
60 Posts
Discussion Starter #3
thanks ! it worked but I used a pry side of the hammer with a plastic piece to protect differential housing. I wasn't able to get it out with pliers only.
 
1 - 3 of 3 Posts
Top