Can-Am ATV Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
180 Posts
Discussion Starter #1
Is East Coast Snorkles still in business? I cant find them...or is there better snorkles kits for the Gade 1000, any Pics of 2" snorkles set-up? Thanks...
 

·
Registered
Joined
·
2 Posts
East Coast Snorkle

I can't find their site either! Any help would be greatly appreciated.
Any other recommendations on snorkel kits? Some I've seen may
be functional but look like crap.
 

·
Registered
Joined
·
554 Posts
Order the xmr cvt exhaust snorkel, it's super cheap and looks factory. Then make your own from there. It's super easy to make a snorkel and a lot cheaper. Unless you have deep pockets and aren't worried about price. But Ibe only heard of them through forums, I'm unsure how to contact them.
 

·
Registered
Joined
·
35 Posts
Order the xmr cvt exhaust from the 800(short frame)? Interested in doing this, does it fit under the renegades plastic ok?
 

·
Registered
Joined
·
554 Posts
It doesn't matter, just order the xmr exhaust snorkel, then go to Home Depot or whatever store is around, get rubber coupling and hose clamps to connect it.

It will bolt right up and fit like an oem fit. Doesn't bulge the plastics or you don't have to modify the plastics to fit it. When I installed mine, I bought some header wrap and wrapped the part of the snorkel that runs by the motor exhaust.
 

·
Registered
Joined
·
554 Posts
Here is a picture that kind of shows it.. I don't have any others, because my motor is currently on the floor of my garage
 

Attachments

  • Like
Reactions: Zilla28

·
Registered
Joined
·
556 Posts
I managed to do my own snorkels. All 2"
Any questions, just ask

 

·
Registered
Joined
·
1,263 Posts

·
Registered
Joined
·
1,263 Posts
heres how mine turned out. im having the snorkels hydro-dipped
 

Attachments

·
Registered
Joined
·
554 Posts
Mine are all 2"
 

·
Registered
Joined
·
262 Posts
Lots of different styles, lots of different ways to do it, lots of choices. I do not like any big snorkel kit, sticks out from the quad, gaudy looking! I like clean and flush and CUSTOM!
Here is my kit:
Can Am Renegade 800 1000 Custom Snorkel Kit for G2 Models 2012 2014 | eBay

The only tricky piece for custom doing the Renegades is the exhaust exit, as some say to buy the XMR piece, i discovered an alternate route and include that as well as the air box tube piece in my kits, hell i've sold some just those 2 pieces and they built their own design from there! The sky is the limit as the G2 Renegades have a lot more room to work with with installing the pipes.
 

Attachments

·
Registered
Joined
·
1,263 Posts

·
Registered
Joined
·
554 Posts
All 2" will work...
It's all up to you, everybody does theirs different.
 
1 - 15 of 15 Posts
Top