Can-Am ATV Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
I need to know where the solenoid is on a 2010 Can-Am Outlander? Can anyone help? With covid I will be lucky to even find one but need to know where to look first. Thanks all!
 

·
Registered
Joined
·
1,879 Posts
foloow the positive lead from the battery. It should terminate on the solenoid. on the \g2 modesl it's on the right above the rear brake cylinder just inside the frame. I beleive the G1 are very close to the same location.. However tracing the cable is harder on the G1's.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #3
foloow the positive lead from the battery. It should terminate on the solenoid. on the \g2 modesl it's on the right above the rear brake cylinder just inside the frame. I beleive the G1 are very close to the same location.. However tracing the cable is harder on the G1's.
foloow the positive lead from the battery. It should terminate on the solenoid. on the \g2 modesl it's on the right above the rear brake cylinder just inside the frame. I beleive the G1 are very close to the same location.. However tracing the cable is harder on the G1's.
Thank you very very much!!
 
1 - 3 of 3 Posts
Top