Can-Am ATV Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
26 Posts
Discussion Starter #1
Can am renegade 800 2008 29.5 outlaws.
I currently have a stock primary and secondary clutch with a Dalton DBO 800M kit. I got a deal in a STM secondary that i couldnt pass up.

Question, do i run the stm secondary with the stock primary or wait until i get a qsc? If i run the stm secondary, do i use the dalton springs in both clutches and the weights in the primary or should i be using stock springs?

thanks, im new to the clutches. just trying to get a handle on them.
 

·
Premium Member
Joined
·
565 Posts
You can run the STM with any of the combos you mentioned. It may not be set up for any of them though. What spring and helix are in it? If used, what did it come off of?
 

·
Registered
Joined
·
26 Posts
Discussion Starter #3
stock helix for the 2008 renegade 800. my stock secondary has a dalton yellow spring in it.

It came out of a modded renny. Ill find out more details.

the stm currently has a red spring in it i believe.
 

·
Registered
Joined
·
26 Posts
Discussion Starter #4
The STM secondary is set up for 28-30 inch tires. I am running 28 laws currently, upgrading to 29.5 in a month when they come in.
 
1 - 5 of 5 Posts
Top