Can-Am ATV Forum banner

401 - 420 of 440 Posts

·
Registered
Joined
·
9 Posts
no warranty
BROKEN RIGHT REAR TRAILING ARM
PAID $ 1000 FOR THE BEST WARRANTY
THE NEW PART IS $200
BUT IT IS JUST A SIMPLE MATTER OF WHERE I AM GOING TO BUY MY NEXT QUAD
AND WHAT BRAND IT WILL BE
 

·
Registered
Joined
·
9 Posts
2014 xmr 1000
bought a $1000 best 3 year warranty
winch burnt out in the first few weeks used it twice
did not cover it
tie rods bent like they were toothpicks had to change both
no warranty
battery quit
no warranty
Rear trailing arm broke clean off
huge safety issue
no warranty
front brakeline made of plastic
failed totally no brakes at all, no warr
same trip front drive shaft failed no 4x4
could not climb hill on way out then when i did not make it.
free flying backwards full speed with no brakes
very huge safety issue near death experience !
went in to the dealer in rocky mountain house
to have front drive shaft fixed
rode for 10 min the next day front boot fell off
took it back to have it fixed he tried to charged me $250 to fix there poor work
i ended up paying $150 to have them fix there own warrr work,
am really wondering about this quad and the warranty and the dealerships
the heat from the muffler burnt thru the air line that feeds the air shocks
all shocks failure
no warranty
front tires blew off the beads many times
took it to dealer in RED DEER they had trouble seating the bead
they could not get it to seat so they used water
went out for next ride with 40 lbs frozen water in the front tire
she was a little bit of a rough ride
i am on my 3rd belt
stock can am belt trash,lasted a few months
replaced it with the commander belt ,trash
put in a new EPI belt hope it lasts

i have a grizzly 700 and have never replaced the belt not ever
WTF
 

·
Registered
Joined
·
80 Posts
2014 xmr 1000
bought a $1000 best 3 year warranty
winch burnt out in the first few weeks used it twice
did not cover it
tie rods bent like they were toothpicks had to change both
no warranty
battery quit
no warranty
Rear trailing arm broke clean off
huge safety issue
no warranty
front brakeline made of plastic
failed totally no brakes at all, no warr
same trip front drive shaft failed no 4x4
could not climb hill on way out then when i did not make it.
free flying backwards full speed with no brakes
very huge safety issue near death experience !
went in to the dealer in rocky mountain house
to have front drive shaft fixed
rode for 10 min the next day front boot fell off
took it back to have it fixed he tried to charged me $250 to fix there poor work
i ended up paying $150 to have them fix there own warrr work,
am really wondering about this quad and the warranty and the dealerships
the heat from the muffler burnt thru the air line that feeds the air shocks
all shocks failure
no warranty
front tires blew off the beads many times
took it to dealer in RED DEER they had trouble seating the bead
they could not get it to seat so they used water
went out for next ride with 40 lbs frozen water in the front tire
she was a little bit of a rough ride
i am on my 3rd belt
stock can am belt trash,lasted a few months
replaced it with the commander belt ,trash
put in a new EPI belt hope it lasts

i have a grizzly 700 and have never replaced the belt not ever
WTF
Yikes! This is exactly why I didn't buy the warranty. Sounds like a lot of your problems are dealer related. I don't know what the reasoning is for the dealer not covering a lot of your claims but it should be spelled out in the contract on what is and isn't covered.
 

·
Registered
Joined
·
9 Posts
Picked up my 2017 Xmr 1000 yesterday. Built the trailer myself, just got the VIN plate and license plate the day prior, so I thought I'd go test it out and break it in properly, I needed a new ATV (my first) to do that.
 

Attachments

·
Registered
Joined
·
2,747 Posts
Picked up my 2017 Xmr 1000 yesterday. Built the trailer myself, just got the VIN plate and license plate the day prior, so I thought I'd go test it out and break it in properly, I needed a new ATV (my first) to do that.
Love the triple black, but like the ford even more!
 

·
Registered
Joined
·
9 Posts
Picked up my 2017 Xmr 1000 yesterday. Built the trailer myself, just got the VIN plate and license plate the day prior, so I thought I'd go test it out and break it in properly, I needed a new ATV (my first) to do that.
Love the triple black, but like the ford even more!
Thanks.
 

Attachments

·
Registered
Joined
·
2,747 Posts

·
Registered
Joined
·
65 Posts
I just took delivery on my Renegade XMR 570. Love it! Only got about 30-minutes on it so far, but am really liking this machine. Can't wait to get my heated grips installed so I can enjoy some more of this snow riding while it lasts!

 

·
Registered
Joined
·
22 Posts
Brought home a triple black XMR 1000 Wednesday. Installed RJWC duals, shifter, air box lid, bumper corners, and gas cap today. I also had it re-flashed and tuned this morning. QSC clutch goes in Tuesday and MT2's as soon as they come in. I love it so far. A big step up from a 400ex. I'm new to Can Am and the forum. Probably do far more reading than writing. I'd post pics but I figure everyone knows what an XMR looks like around here.
 

·
Registered
Joined
·
85 Posts
I love my 2016 xmr..
I have an aluminum underride gripp heaters Yoshimura extrem bumper reflash an my handlebar have a rox,LED flashlights and a sit for two Person..



I run with itp mudelite xtr and Cst behemoth and Stock Gorillas

My Last Update ist from Paul Devitt,The Hulk faceplate i lovit this atv

I have also wrapped my exhaust systems with heat band and additionally a heat kit installed the tip I have from this forum of Jay
 

·
Registered
Joined
·
26 Posts
Putting her back together after installing mods listed in sig.
 
  • Like
Reactions: Holtzy

·
Registered
Joined
·
14 Posts

·
Registered
Joined
·
42 Posts
It's been a while since I've checked in, but here's the latest pics:
 

Attachments

401 - 420 of 440 Posts
Top