[ArlyA]

Seems like the only guys with this grief is guys running pods or mud wheels. Ours 1st time fixed by the brp shop lasted 1/2 an hour towing a snow implement. Had to do something!

 

[ArlyA]

At work this week in the yard

.

 

[ArlyA]

I should add that we still need to add some insulation to the under bed tool box where the muffler is nearest and I'll knock some air venting holes to its as well after its top cover slightly warped this past winter. Also have a new winch roller setup for it.

 

[Chief...]

I should add that we still need to add some insulation to the under bed tool box where the muffler is nearest and I'll knock some air venting holes to its as well after its top cover slightly warped this past winter. Also have a new winch roller setup for it.

I thought they had fix that issue with the shield that came stardard on newer rides, but I had to buy it for my 2015 model. (2) Attn: 6x6 owners | Can-Am ATV Forum (can-amforum.com)

 

[ArlyA]

I thought they had fix that issue with the shield that came stardard on newer rides, but I had to buy it for my 2015 model. (2) Attn: 6x6 owners | Can-Am ATV Forum (can-amforum.com)

I don't know how those older ones are setup but there is a heat shield between the toolbox and muffler on this one but it misses the front portion of TB. BRP did put reflective tape there but maybe it didn't reflect enough? I'll get pics.

 

[ArlyA]

I'm not sure how many ponies this 1000cc machines has (82?) but I'm not all that much into details like that but when we get a nice dump of fresh snow we can tootle along, pulling some implement along while the throttle is pegged at max. Towing in snow really does take HP.

 

[ArlyA]

My insulation is predicted to show up today and I've started into drilling some 1.25 holes to allow more air through. Any other other newish 6X6 owners have this grief?

 

[ArlyA]

Got vent holes drilled in under machine box, tool box and insulation looks good. Will post pics at some point. The boxs steel frame above the muffler gets hot enough to melt box parts.

 

[ArlyA]

I don't know how those older ones are setup but there is a heat shield between the toolbox and muffler on this one but it misses the front portion of TB. BRP did put reflective tape there but maybe it didn't reflect enough? I'll get pics.

I finally found the updated heat shields in these old posts. Ours of course does have the new shields as shown but our box started to melt above them.

 

[ArlyA]

Extra heating shielding went on, venting added to under-bed tool box and everything is back together. I'd guess there are no 6x6 users following this.

 

[ArlyA]

You folks suggest this Warn faring and I finally got it installed yesterday. Its nice!

 

[ArlyA]

As seen on the trails yesterday.

 

[ArlyA]

Still not enough snow here to spit at. Working on the implement seen in the trailer yesterday.

 

[Chief...]

You folks suggest this Warn faring and I finally got it installed yesterday. Its nice! View attachment 114409

What's the P/N on that? Isn't that suppose to help with the wear on your winch line when you use the winch with your plow? I don't have a plow but my brother does and I will give him that information.

 

[ArlyA]

Its
WARN 69373 Winch Roller Fairlead for ProVantage 2500 and 3500 Winches

 

[Chief...]

Thanks

 

[ArlyA]

Got pods on today and ready for snow. A few updates have been done. Putting plow on is no big deal.

 

[Agramon]

That beast looks sick with those tracks on.

 

[ArlyA]

I've been working on getting my light pole back onto this machine. its about 3ft tall, has a green strobe and LED lights rearwards and forward for plowing purposes. I'll post pics asap..

 

[ArlyA]

Here is the light pole I'll be mounting on the box front soon. Been working on it over the holiday. There is a swtich for each light on it and the strobe is green and quite bright.