Last week while i was riding from my garage to the trail my quad cuts the power starts to beep and show a message on the LCD says "<break>" i stopped and check the breaks and wheels but there was nothing unusual. I was 2-3 mins from garage, so i decided to return and check in detail at home. While traveling it let me to speed up to 10-15 km/h and again beeps and says "<break>". As i enter the garage heard a sound and an intense smoke from right behind. Anyway my rear break was stuck and caused an increase in temperature in the hose, and break hose could not make it and teared apart.
This week i replaced the hose from the break center (All break hoses are connected to this part) to the caliper. Add some new DOT 5.1 and removed the air in the new hose. At first it seems like everything was ok. But after a few minutes test ride with both front and rear breaks tested. Rear one was stuck again. I did not anything for the front breaks. Is anyone have any idea ? (I did not do anything to front breaks)
This week i replaced the hose from the break center (All break hoses are connected to this part) to the caliper. Add some new DOT 5.1 and removed the air in the new hose. At first it seems like everything was ok. But after a few minutes test ride with both front and rear breaks tested. Rear one was stuck again. I did not anything for the front breaks. Is anyone have any idea ? (I did not do anything to front breaks)