Pulling Codes:
1. Turn Ignition to Lights On position
2. Set speedometer to Engine Hours
3. Press and Hold selector button while switching the Hi-Lo beam 3 times in a row (quickly)
4. Diagnostics mode is activated now
5. Use selector button to go through codes
6. END will come up when all codes are displayed
7. To end mode hold the selector button for more than 2 seconds
OK guys really dumb question, where is the selector button? I swear I had one before, now that I had the BRP snorkel kit installed, I can't seem to find it. I feel like a real dumby for asking but need to get my error code.
OK very odd, its not there, and has a clear plastic peice that covers where I though it was, I have actually taken the spedometer apart to see where it would be pressed and can't find a place a button would go.
look at the top a black dot/hexagon button and its its on the very top in the silver circle if you need me to point at it ill take another pic. but if its not there its prob moved for the snorkel? I dunno but we'll be here helping you through the way.
OK finally got around to take some pictures of the speedometer. I know where it should be, but it aint there, what do I do now? As you can see the protective case is solid, and even when I remove it there is no button below it. Is there any other way I can get the error codes?
Try taking apart an old calculator or TV remote with rubber buttons. The buttons will be all together but you can cut one off. One of them should work.